Видео

No, it's a modified originál Probe hood.

??

@@vladimirsimko9993 fix this junk

Because with a decompression plate and upgraded head studs and supporting mods you could get it up to over 300+ bhp :) ruclips.net/video/aY6sgANla0g/видео.html

@@RaceByNight or you can get a bigger engine to begin with

@@deppe4202 Yes, but not everyone wants to do that, some people would rather work with what they've got, worst comes to worst they blow the motor and swap it for a bigger one then they would still have the turbo parts to reuse I guess.

spud

@@deppe4202 m50b20 engines are great for boost. They can handle alot of power on stock internals. Cilinder walls are thick and wont crack. The drivetrain is also able to handle its power.

No, stock 80mm

This is for drift, not showroom. That´s all. Show us your work Maestro 🤣

This is for drift, not showroom. Show us your work Maestro 🤣

Use por-15, make sure to use the whole can since it cannot be resealed, use some disposable paintbrushes since they cant be saved

here i am one year later and rust freeee

Kúpil som 90° silikónové "T-čko" a pohoda. No teraz sa bude robiť celonerezové sanie od turba až po sanie, takže to bude z nerezu + sa bude osádzať nové turbo GT30.

Dobrý deň, hrany boli do viac ako polky materiálu zbrúsené (každá strana do "V"), malú medzeru som mohol nechať, no nenapadlo ma to. :)

Sabes que los 320i son motores de 2000cc y 6 cilindros no?.... 🤦🏻‍♂️

@@jonatanpascual1 YES. 320i = 6cylinders, Type = M50B20 NONVANOS (206S1).. :)

I have a Bmw e36 325i turbo but it's a more powerful original engine so a 320i I would say 330-380hp

Now is from e36 325TDS, but I will be giving the GT30 .

Nazdar Luky :) no jasne, len treba este nejake drobnosti porobit doladit a potom mam v plane :)

@@vladimirsimko9993 Tu piggy back det jednotku podarilo sa dobre spojazdnit ? :) ja cem po B16 turbo tež kupovat 6val M52B20 a dat tam TD04 s nafty :D Inak B16 turbo robi radost tento vikend padali dole M52 110KW o 1/3 drahy :D

@@lukasnevidzan5523 Ta DET3 tam pojde teraz na ladenie, bolo to na seriovej riadiacej na 0,5bar a chcem tam cca 0,8-1,0bar, tak uvidime co to povie :) ja tam mam tiez TD04, ale uz sa obzeram po holset HX35.

@@vladimirsimko9993 na seria jednotke tych 0,5 bar v každom režime jazdy si to rozumelo ? vstriky sid aval sčoho viem nerad aj ja sa zdoverujem niekedy zo svojou upravu B16 ale tak sme fandovia značky jednej :))

@@lukasnevidzan5523 ano nema problem na celej drahe otacok, len je to vela laborovania a upravy mnozstva paliva, ale so sirokopasmovou lambdou vidis co sa deje a da sa s tym pohrat i ked je jasne, ze to nie je uplne top, ale funguje to... a pohoda ja s tym nemam problem :) vyzeraju ako z 2.8i ale podla cisla mi nachadzalo m3 3.2l.. ak si teda dobre pamatam, takze neviem 😀😀😀

Thank´s. I paid about 1000 -1500 euros, but I did everything myself.

@@vladimirsimko9993 hopefully i will buy turbokit for this season to :p really like you do it your self!

@@nexxpe If you don't have a programmable ECU, especially give the air mass sensor in front of the intake part of the turbo. I've already edited it. Good luck.

Nie, je to zelezo a nie liatina. Po liatine, keby buchnete kladivom, tak sa Vám rozsype. Ramena aj tehlica sú zo zeleza, takze zvarateľne CO2. Liatina je taktiez zvaritelna, okrem bielej liatiny. Vsetko zalezi od obsahu uhlika v materialy.

A mate aj horne ulozenie tlmica nastavitelne alebo seriove?

@@ImoTuning nastavitelne, pretoze pri seriovych by ste mali problem pri vytacani kolies do stran.

Figure it out? I wanna know to

I used 1mm sheet for mine

Yes, compression is stock, because boost is only 0,3 bar now. Oil return feed lines is from the turbo to the oil tank, but your fitting must be above the oil level. It´s best to place it as high as possible.

díky moc. Práce to bolo síce veľa, ale výsledok stojí za to :)

@@vladimirsimko9993 Nevieš koľko stojí robota za niečo takéto stým že plechy prahy,lemy, zadné čelo by išli nové a vyvarila sa aj podlaha a nastriekal ochranný náter?

@@slovakpatriottv to ti neviem presne povedat, ja ked som sa jedneho chalana pytal na vyvarenie len prahov, tak mi povedal cca 300eur +.. hlavne sa tazko hlada clovek, co by ti to spravil, pretoze je to prplacka, ale myslim, ze okolo 700eur by si sa mohol zmestit.

@@vladimirsimko9993 To je dosť ale cena adekvátna s tou piplačkou okolo toho.

Hi, body mastic.

Thank´s. :) It was so hard.

Hi, internals is stock, turboTD04 from 325tds and ecu was oem, but now ecumaster det3

@@vladimirsimko9993 Thank you, you've help me a lot. What is the turbo's pression? 0,5 bar, 1 bar, 1,5 bar...?

@@vladimirsimko9993 from where it comes the smoke at the end of the video?

@@jonatanpascual1 It´s OK. :) turbo pressure on the video was 0,3bar, but with ecumaster det3 I want 1.0bar. I make video, when I do it :)

​@@jonatanpascual1 The smoke goes from thermal tape on exhaust manifold, because it was new + the exhaust screws have been slightly tightened.

Thank´s :)

from 325tds, but I want to Garrett T28 from Nissan 200sx S14.

@@vladimirsimko9993 I have gt35 in m50b20 but is a bit too big. ruclips.net/video/XlfdvtEw0Mc/видео.html

Nice job. what´s your ECU? stock or any megasquirt?

@@vladimirsimko9993 Ecumaster DET3 in fuel implant mode.

this ECU is for 6 cylinders?

Can´t speak for the 1st gen in the video, but 2nd gen is my all year daily driver and I had no problems with it.

@@4kocour424 I bought my first gen shortly after I posted that comment. Are you in the Ford Probe/Mazda MX6 facebook chat?

@@crescendo4275 Oh, good for you! :D Im in our local Probe club and some FB Probe groups, but there Is quite a lot of them.

@@4kocour424 local Probe group? thats wild. There are two Probes in my city and I have both of them haha

@@crescendo4275 Yeah, unfortunately most of the members are from other side of the country :/ There is a bunch of people who have Probe near me, but I always learn about them only when they are selling theirs :(

Hi. no, the turbo was bad, but it's new. You can see new video on my channel.

thanks :) when you start doing it, it will not be so bad.... good luck :)

i realize it is kinda off topic but does anybody know a good site to watch newly released series online ?

@Luke Kobe flixportal :D

@Lukas Chris Thank you, signed up and it seems like a nice service :D Appreciate it !!

@Luke Kobe No problem :D

Hi, it´s folios to light. :)