Видео

and which would be the best?

This fixed my 750C display. Dragged my multi meter lead over the battery connections a few times quickly and its working perfectly now. Thank you!!

Hi how did You open the compartment? where are the levers ? thanxs inadvance

Thanks for the video Rik, Look, I dind't undestand the part of the white and green cables, waht did you said they are for ? The brown and orage I could understand, but not the other two. Thank you in advance.

Hi Rik, thanks for the tips. My glass is broken, display is fine. Were did you got a new glass? Do you have a link to share?

How do you short the battery would been nice to see that

Mine is over charging as per its own readings all ready (8,6v for 2s)

Just avoid htrc brands all together

H30 defet

Fixed it. Thank you so much for posting this video.

PERFECT ! The 2nd time it arrives, the first one I opened the box with a few damages, shorted the cell and it worked. This time I drilled with a column drill (not to drill all the display !) at 5mm of diameter. I respected the location of @MrKlaad ("It is ~15mm from long left side and ~35mm from top short side "), took care of the side right or left and it fits perfectly (see on the image if I can publish it where it falls). I will put a bit of silicon on the hole and the next time it will arrive my session will not fall down : I retire the silicon, use a BTR key I have on the bike with several tools to short the battery, put the silicon on the hole again and do my session. THANK YOU for the video !

Thanks this totally works don’t no if shorting them lasts long yet but a quick hole on the back to short the cell for a few seconds certainly got my bike going again.

What was the type of battery you orderd on aliexpress ?

Wat is het type van de batterij precies ? En doe je het kortsluiten met stekker erin of uit ?

Worked for me! This is why I love RUclips. Thank you Sir!

My 860c display boots up, but then horizontal lines shows up, and graphics start to freeze, motor and throttle works. Malfunction keeps happening. So it looks like the display is not dead. Should I replace the battery? Will that be the case with a small shortenong + wit -

Thank you, quick shortening +-from the small baterry recovered my 850c. I have drilled just a small hole on the back of display, so we don't have to unglue the frame and the screen from the front.

Thank you for your time. I bought one but it has a four-digit lock. Is there a way like factory reset or something similar?

Yesterday i almost lost my house with this charger while storage charging 2 of my brand new Bashing 11000mah 14.8Volt. I charged outside the house but when it started to burn those 1100Amps made the fire quick 😱

Nice, can you please make a test and teardown?

Rik ,ivm de DPC18 display . de error code 21 komt steeds terug ,ook na vervanging van de sensor . wat kande verdere oorzaak zijn ? thx bij voorbaat

Kinda drives me nuts that you cannot use this bugger to test Servos themselves 😑

How long is your warranty? They once accepted it as a guarantee after 5 months and now they will not do it after 1 month.

Have you guys noticed that if you use the discharge function on channel 1 that it errors out it a couple of minutes with the message "OVER Int. TEMP CUTOFF". This continues every couple of minutes requiring you to restart the process. This exact discharge function fully completes successfully on channel 2 with exactly the same parameters and cables. I am assuming that this is not the same as the Ext. TEMP CUTOFF that you can set in the user settings. I have tested this on a couple of these chargers with the same observations. Tried multiple experiments, e.g. with/without temperature probes, default External Temp Cutoff as well as adjusting this parameter. Using new or used LiPo's give the same errors. Again, it works fine on Channel 2 but not Channel 1. Just want to see if anyone else experiences this.

I cant see any firmware files anymore on their website for this device?

I have a similar issue with a Tenergy TB6 charger. It under charges buy .15 volts consistently during balance and storage change. Yet it'll slightly over charge NIMH packs.

Glad it's not just me. Mine under reads the voltage by between 4 and 6 volts. Not acceptable at all, and yet so many positive reviews on RUclips...

I also have the same charger and apparently not well balanced

Garbage charger and no customer support. Buy something else. I've left multiple messages for this manufacturer and a year later no answer...

Hey how did you fix the alignment issue on your jlb 21101. I have the same problem and need help

Why some videos are comment disabled by u?

i have the same issue with mine. How did you solve it? Can you calibrate the charger? thanks

I'm having the same problem also with T240 It's have wrong reading and when I re calibrated the setting won't saved And now my the charger is suddenly stop functioning

Where did you get the firmware update from?