Видео

was really worried going into this job because my mishimoto intercooler elbow by the lower radiator fitting was a headache to snap on. So there is no way that thing was coming off. Thankfully I was able to spin the elbow to the passenger side which gave me enough room to work with the fitting. I tackled that lower hose first, and then did the other two. Thank goodness it wasn’t as bad as I anticipated. The original fitting on the radiator is a 32mm socket. for anyone with deep sockets it makes removing them alot easier. The Fleece fittings I believe were 24mm. Made it way easier to tighten onto the radiator in the cramped space. Just be careful not to OVERTIGHTEN! Doesn’t take much to tighten them be careful!

Did you guys use standard life proof natallation instructions when installing in your motorhome? I.e. 1/4” gap and no glue or nails? We are getting ready to do ours

I would like you to try to compare to the meguiars one step and give your opinion.

really great video, they should use this for their official video !

Get the wolf eng column bearing I promise u will not be disappointed!! I just ordered my borgenson steering shaft and I’ve previously installed the wolf bearing and psc steering gear box super impressed with the results compared to before but there is still that little bit of play I’m trying to eliminate

Straightforward, easy to follow, great information. Perfect install review. Wallas needs this on their website for a “how to”. On another note, kinda makes you wonder if they don’t want the fuel line near the heated elements why is the pump valve facing that way. Makes you wonder. Cheers.

Can this be power with one of the Honda, Generac, Predator generators?

I was looking for what are the eye hooks for? My HF chocks have screwed in eye bolts

I'm from Russia. I'm building a travel module. I'm trying to choose a stove. There is practically no camping in our country and it will not be possible to find external electricity. 99% travel with a gas stove. Diesel stoves are not sold here at all. I wanted to put induction + battery at 500-600 a/h. But the size and required power of the inverter is a little frustrating and bsm is needed for high currents. I want 2 comfort plates + a microwave. This is more than 250A + wires with a finger))). And if you add an air conditioner and a washing machine.....So I'm studying a diesel stove.

Also - to reduce splatter - google ridge monkey pans

Always run Wallas kit with lithium batteries ! Why ? Glow plug power consumption is about 9A during startup. If the power drops below 12.0V the unit goes into failsafe. Not a problem with lithium. Man thats a hard way to clean! Instead use Mr Muscle green glass cleaner a silver pan scourer and wipe off with a paper kitchen towel. The glass is toughened and it will be fine (my XC Duo is after several years of abuse)

I have a Aims 24 volt 2000 watt and a Aims 2500 12 Volt. Inverter/ Charger They will power the Gates of Hell 😂. They just keep on putting power out. Great product

Stayed at MISSOURI HEADWATERS STATE PARK. It was great. We rode our bicycles all over the park. Check out Sacajawea Hotel in Three Forks, it's so cool. They say it's haunted.

Best thing I ever did was buy a quality 12v compressor fridge ... I live in my van in the UK and even this far north with our shite climate , my solar runs the fridge/freezer for 4-5 months , in winter , it draws 4Ah when its running so its no biggy with a dc to dc charger and 300Ah of lifepo on tap . As for noise , its a behind 1/8" ply from my head when in bed .

Good info!

Great walkthrough!

I have had one in my Class C for 5 years using a 200 amp lipo. It will handle 30 amps passthru. We had the AC connector strip burn up starting at the factory side. I just had to bypass the strip.

We're having problems with our Sterling BB1260. I'm wondering which generation we have. Do you have any information about which colour labels identify the different generations?

I seem to be having the same problem with mine right now and have already diagnosed it to be the board. Do you have a price for what it cost you to order that board?

It would help to quantify mileage as well as age (both DOT stamp & hownlong they were mounted) when reviewing ST tires.

What’s the link to this

Return it

Thank you for the glowing review! This is very helpful for us and future customers. Always a pleasure working on your truck.

Mine is a AC/DC Brand the Gentalmen that designed and built mine is from China but Lives in Tucson AZ and the remote that your showing on video looks the same as mine but the air handler and outside unit is not designed the same Mine looks much more designed Better and heavier duty then what your showing and so far mine Works Great.O and mine is on A Large Car. That's a Semi Truck for all of U rv people o plus don't park at a truck stop we need the spaces and don't fuel at Truck stops the sit there pull foward so a Semi Truck can Fuel ... thanks

do you have the length of each hose?

Interesting. What are the dimensions of the interior unit?

Does the aims or the progressive have an isolated ground? I’m charging off my EV 120a charger and there is no true ground so I need to ground the charger on the frame. Can either of these do that?

Did it kept it cooler and by how much.

Does it work in the rain?

Question is: why did it fail in the first place. Looks like it almost caught fire.

I have been working to convince them to build my ALL IN ONE model that vertically mounts into a 8 x 10 cut out. Still working on it, China is Fkn clueless to how the rest of the world sees this vertical mount, no gasses or tools needed, best option of DC air Conditioners.

Can you run the ac while driving down the road?

It's a AC unit that runs on... DC... the irony is not lost 😅 so it basically has a electric compressor. Is it worth the money or is it kinda weak. Cause you can just run the vehicles ac and do pretty much the same thing

Did this cooler drop your temps any I just purchased one for my LBZ.

yes, maintenance is the biggest issue with these devices. Mine has begun doing this same thing as you guys, just not as bad. However, sending it in is not an option for me. I cannot understand how companies like this, that build products for people that are sometimes thousands of miles away from any service center do not build accordingly, for DYI maintenance and installation. It is unprofessional.

Those tires are made in China! Look on the bead that seats on the rim, it will be marked chine in several places on the bead! I had a set on a horse trailer and had two blowouts on I 65 in Indiana! Wouldn’t own another one of those junk tires!

Do you got this one?? ruclips.net/user/shortsCd1oIhiEZAQ?si=bhrwjttSN5lujyBu

This video will explode

I use Howes fuel additive for my 06 dodge 2500. Had no issues with the engine. The best is hybrid, we have 400 watts on the roof , 200 watts on the ground if needed, and a renogy 40 amp dc to dc charger. We only have 300ah of lithium. We get by fine most of the time cause on average we use about 85ah a day. Our biggest draw is our fridge when driving uses like 340 watts constantly. When we get to a boon docking site we put the fridge on propane. Nice vid u2. 👍🏻🇺🇸

Excellent video.

Dude

Wallas should’ve replaced the entire unit with a new replacement for the prices they charge and inconvenience to you. These things are vastly overpriced.

Running it for an hour and a half and only having it 6 degrees cooler is trash

Thank you for this video. God bless brother !!

How long does it take to cool down?

Thanks for sharing this video! I would like to know if the refrigerant hoses connect to the inside unit directly behind the unit straight through a hole in the wall, thus the hole is covered by the inside unit. Or do the hoses come out the bottom or side and have to be exposed inside before running outside? I need to know because the location I want to install the inside unit has no clearance below it or to the sides. The hoses must run directly out behind it.

I've been using one with multiple vents for 2 weeks now, cools great under heatwave, 35-40C outside, 25-27C inside, 30A-50AM draw. However, after running for 6-10 hours sometimes it starts to blow warm air and no longer cools... E05 error popped out and the compressor was 70C hot, reached out to Treeligo on Aliexpress and they suggested multiple reasons. Refrigirant was all good, 10 bar on high and 3 bar on low... Seems like malfunction with compressor electronics unfortunately. After some restarts it works again.

Thanks for the info! Is the unit still working good 8 months later?

Your video helped a lot thank you! I changed the lines and upgraded the cooler.

I just reached out to Treeligo because my wiring is too hot to touch today. I don’t know if this has been ongoing, but it is the first time I’ve smelled that melted plastic aroma coming out of the electrical closet