Видео

@@SergioVall glad you ask im going for my nxt video update in few weeks. Hehe so far my t4r doesn’t overheat at all hehe. If this video helps you please hit 👍🏻

@ZMacky Can you tell me after deleting x reas , what is the best shock for limited 2015 4runner. I'm not interested in off road

@ then this kit is the best for you if you’re like me “mall crawler “ I don’t do any offroad activities atm. And dont have funds to dump into a modifications that will be needed if i lift the truck. This set up retains all the oem set up as far as i know. It’s been good until now. If u have budget there’s another alternative heard good things about dobinson. But again I can’t tell if it’s good because I haven’t try it. I will try that when i need to replace mine. Please don’t forget to hit 👍🏽 on this videos. It will help me to create more content like this so you guys don’t have to gamble if the products is good or not

@@GabrielGranado-y3h yes i do. Click my channel and go to videos. And please hit the 👍🏽 button and this video helps you. Thank you in advance. It will help me to create more content like this

@@GabrielGranado-y3h I apologize i think i don’t have that on here.. mb 😞

@@ShinMusha so your desire tires will fit stretched on 9.5 rim size

@@ShinMusha No rub , cutting and rolling fenders! I only rub slightly on full lock if im making u-turn. Basically 1 and half finger gap between my rubber and my fenders. But before that i set it up 1st on 2finger gap all corners then it just settle.. Don’t forget to lile this video if it helps u

@@ZMacky im looking at yoko ad09 on 235 40 or either a 245 40

@ ad09 runs a lil bit wider compared to other brands I suggest go 245/35 if u can or u can take 245/40 then adjust your ride height i guess

@@ShinMusha ad09 runs a lil bit wider compared to other brands I suggest go 245/35 if u can or u can take 245/40 then adjust your ride height i guess

Did you make your own mounts and stuff? and what ECU are you running? I heard you say Link, Im curious which one and it runs everything on the dash and the engine in sequential ignition?

@cerevo link g4x xtreme, and yes, it controls everything, but the emissions controls near the gas tank. It needs an I/o expander or the link g5 to have enough I/Os to control that. (Already wired for them though). Sequantial fuel / ignition, dual wideband, 2 knock sensors, both vvt solenoids sequentially as well. I'm also monitoring fuel temp&pre, oil temp&pres, ethanol content/temp, prethrottle pressure, and manifold pressure. I don't have AC, but I just need to install the condenser and compressor. Otherwise, the wiring is there.

@@86baus hi i sell this lights.. Dm me on ig: zmacky

@@rasundesilva6088 yes! Because hks is Japanese brand and our car is made in japan. So really it’s kinda like buying apple and u wanted a taste of orange.. Plus hks is in the industry for a long period of time

@@belenbriseno9602 hi can you please elaborate your question? Do u mean converting your xreas system to regular coils and struts??

@@thesuprari thank you so much papi! Hope that u can chismis this to all your friends out there! And i hope to see you soon! Hmu if you’re in Calgary!

@@tenzingchosang865 thanks haha I know that. They’re too busy on accident though lmao

@@Iwo26 overnight parts from japan.. “Rhdjapan” U can contact me via Instagram. We have local importers.. and have that trd in stock .. We shi all over the 🌎 Please like this video if this helps you

I buy 2 bottles to my local dealership keep the receipt. And i ended up using them all coz the previous owner never did it so i flush mine twice. But if u do yours on time u only need 1

@@bobs4718 thanks for your feedback.. Agree and kinda disagree.. Inside the filter is kinda like paper filter so technically u fill it with oil it will be wet and i agree it will drain most of the oil. But the paper filter itself will be wet. . So it’s not totally dry when we start it

@@magnacars np! How to colab and work with u next season

@@SamuraiBlues5 nope not at all. It works perfectly fine on my end. When u properly removed the seatbelt holder on the oem seats.. at least on my end. If that’s what u mean

@@ZMacky not exactly. On yr right rail there is a bracket welded on top for the seat belt. That thing looks like 3 to 4mm thick. Doesn't that bracket get in the way when you bolt the railing to yr seat?

@SamuraiBlues5 oh i see. I removed the seat and re do everything all over again

@@raymondcastro489 ha? Wdym hehe r u home now?

@@Ellyacobresare not that fast hehe

@@ricerhondaa so fun wish i can record better.. Come join us next time if you’re from ab 🇨🇦

@@gastonisabeaner what’s the reason behind??

U can do that if you don’t do it often. I always keep up on my maintenance. So far my truck never let me down. Even driving from Calgary to richmond

Gotcha do what you want to do thats your truck,

Cheers 🍻 brotha ✌🏽 If this video helps please hit 👍🏽 button hehe

@@paulhenry1402 dm me on instagram @zmacky

@@ZMacky I see different fog light looks for the GR 86, however, this is the first time I saw this type. I like this style better. By the way, I did DM you on instagram.

@@paulhenry1402 did send u a pM on instagram

@@ZMacky I saw your response and i answered it. I like this video; however, you should show the completed project, with the lights and bumper installed. Do the fog lights come on, when you turn the lights on?

@@paulhenry1402 If you watch the full video without skipping you will have your answer

@@Jay-j6s6r i know. But it’s winter time when i did it and i got lazy mb hehehe

I designed it for oem application

Will do if my solution fail. So far its been held with a all weather wire trim protector. Please like this video if this helps you

Copy boss

Oh hi 👋🏻

dm me on my ig @Zmacky

Thanks mah man!

Thank you so much i did! If you guys want a review on this let me know by smashing that like 👍🏻 button

Dko na sya nakita ulit

@ZMacky huli TV appearance ni jiimmy nun nlipat yn eat bulaga sa tv5 biilng guest nlng sya dooon not as an regular ska s gma 7 ni bong revilla na wlang mtigas na misis blang sidekick ni bong revilla jr. Hndi n sya dto nk tira yn si Jimmy nsa Canada n yn ng migrate dti me vlog sya dto stin now iba n nsa Canada n sya nktira at ng vvlog yn si Jimmy santos dhil wla n sya regular TV o movie projects dto stin kya ng decide n din sya mg migrate kgya ni jobert Austria na dti rin artsta at comedian dto gya ni Jimmy santos.

@@ZMacky trabho ni Jimmy dyan s Canada tga pick ng plastic bottles ska dndla sa recycling storage pra mg muli gnyn mga trabho ng iba dyn blue-collar jobs

@DONALD-rx9nq ngek how do u know? Nakita m ba sia

@@ZMacky nsa vlog nyo po

Not sure about that. We haven’t gotten any tickets here.. but we dont rev it up or act weird around public roads. We do it in touge. If this video helps you please consider hitting the like 👍🏽 thank you vm!

Should be okay.

Glad u like it

Please like this video I’ll appreciate it a lot! @Dubbadee124

Thanks for the input. I’ll try that. And see if it’s cheaper than rhd japan or blackH

Thanks man! If this video helps you please hit like 👍🏽 It’ll help the channel alot to generate more contents in the future

Yes it will be faster to test and check the thermostat

U have to feel the hose. If it’s on normal temperature already. U have to run it for 45mins at least. And check if it is still bubbling or not. If not then you’re good

I did half of the job and i used to work with em so it won’t be accurate.. But i think if a local shop would do it , it’ll be easy 600 Canadian $.

@@ZMackyThank you

@Thankyou_3 welcome brother please like 👍🏽 the video

Thanks for your comment i know that v8 is a lil superior in terms of engine strength overall hehe. Just hate dealing with the timing belt. Anyway thank you very much for your input. Please consider smashing that like 👍🏽 button!

Good to know I’ll look into that pennzoil, But i find all the company is trying to rob us. Why? They will try to find and do anything to deny the warranty. Like think about all the engine starvation happening on a bnew 2022 toyota gr86 and brz aka GRZ, Dealership doesn’t want to cover the warranty even though the engine have only 4k or 5k miles so kinda hard to say now a days.. But thanks for your input 🙏🏻 Don’t forget to like the video if this helps u

Hmm if i find em on sale why not hehe. Please consider hitting the like button thank you 👍🏽

Ah ok. For me its special. But hey thanks for your input ✌🏻

Click 🔔 (all) And you will hit it. Even hitting 800k as long as u keep up on the maintenance religiously

You really have to baby the newer cars nowadays. It's not like the Toyota quality of 10-15 years ago. With CVT's, direct injection, turbos; regular maintenance is the key. Also always use top tier gas

@kalani1987 agreed. Still missed my 03 corolla had that for awhile.. Then i got kids and decided to sell it. That thing is a tank

@kalani1987 i fill her up at costco cheapest in town haven’t got any issues 🤞🏽

@@ZMacky yes Costco is top tier

Custom made by truly yours 😉 Can sell you the whole kit. Dm Me at instagram: @ZMACKY

That is cannot confirm.. have to go back to my 📖 books for it. But what i technically do isn’t full drain. Only drain what’s inside the RAD. Not bleed the whole system.. That includes coolant lines and stuffs.. And if this video help you please consider hitting the 👍🏽 on this video.. It will help me and the channel to create more of this kind of content in the future.. Thank you vm