Видео

@gumbystown Thank You for your Comment…… sounds like a wonderful dilemma to have 🔫🤠 Unfortunately I share a space with a spouse who really wants my addiction to The sport of Airguns collecting to be gone …. She would much prefer me to put all my guns in a pile, and light a match to each and everyone. I would love to keep all my guns in open space’s as well, or to have a dedicated room would be bliss. I keep them in closets, in storage cabinets inside of closets, and in cases under the bed. So these kinds of storage solutions have to be my go to options. Some I leave in boxes stacked in corners of my only inclosed room that doubles as an office. That’s to keep them out of her sight because the door stays shut most times. She gets on edge whenever I need to bring them out and use them in videos. I’m allowed to have the ones I’m filming with for a certain amount of time out in the open, a few days at the most. So my solution to that, is to create virtual files on my IPad in the photos album to know what my inventory is. Sometimes I use virtual gallery apps (on the same iPad) to display actual photos of my guns as well. It must be nice to be able to see them all on stands like that. It would be nice 4 sure!!! Enjoy Your Collection….. 🙂 🔫🔫🔫🔫🔫☕️☕️

😎 BYD Hope your 2025 New Year is Awesome!

Thanks @Indiana All the above! Sooner or later…. That video was 1hr and 5 minutes. Had to cut a few corners. Plenty of content is on the way. Had to slow down for a minute. Had a couple of family loses over the holidays. Content creation is on the back burner for now . RUclips anything else right now on hold. Had to feed the algorithm. It’s gets waked out once you stop putting out. Cheers 🔫🔫🔫🔫🔫🔫

@74Willy Unfortunately your were disappointed in my video and or videos. Content creation can often be a hit or miss proposition. I apologize to you for not hitting the mark on what you were looking for. Please continue to Airgun on your own terms. Hopefully you will find whatever you’re looking for. 🔫🤠 🔫🔫☠️ Good Luck! ☕️☕️

@@airgunsraider1007 Thank you Sir!

@Dory So couple of things The good news is, that the problem is probably in the magazine. That’s better than if it were a problem with the gun. Your seals in the magazine might need changing out. Look on RUclips on how to fix 92A1 BB gun magazine fix’s or add fixing the seal. Another couple of thing that might be happening is that your co2 sintch cap might not be flush causing the cap plate not to pierce the CO2 Remove the cap plate ( look at the top to see if the CO2 has punctured or not)….. line it up and try it again with a new CO2. Listen for the hiss sound and continue to tighten. Do not over tighten. 2- it (CO2) in the mag could be over tightened, in that case, just slowly use the Allen key to back of and listen for the co2 hiss, tighten back up … but not too tightly 3- if the seal is dry, you could empty the co2 canister out then drop a a few Pell gun oil drops in the chamber leave it sit for about an hour or two. Then try put the co2 in the magazine and try again . 4-take the co2 mag out of the gun and check to see if a BB is stuck in the barrel. Sometimes BBs are irregular and could jam the barrel. If so the gun will not shoot properly. Try using an un jamming rod then put the mag back in and try it again. 5- also…. The Co2 could have just leaked out of the canister. It happens! Sometimes it’s good to have more than one mag for these models . That’s a way to check if the mag is defective or even the gun. Good Luck 🔫🎄

@Rick Some Do My friend…. and Some Don’t

@JBBG 🔫🎄🤠 Same to You Sir! Enjoy your Holiday too! I plan to catch up on some of your videos along With some other Airgunners videos in my down time. ASAP 🔫🔫🔫🔫🔫☕️☕️

@squirrelAW Absolutely! 🔫🔫☕️

I have the MP9 version , missed out on collecting the M&P 40…. But I have one saved in the Airsoft version in a basket on Evike

@airgunsraider1007 if you wanna get it there is two good versions the pellet and the 2.0 there is clean,slide cut threaded or booth the normall one kinda funky tho the 2.0 is long tho

@@airgunsraider1007 moment of realization the 92 fs steel bb is a1 I was looking at green and tan a3 with threaded barrel tho

@johnycash978 That Pellet version sounds great! I’ll put it on my long and continuous growing list. Pellet pistols are my favorites. I still buy BB pistols just the same. I’m not sure if you’re familiar with Airsoft pistols or not. They have all kinds of models of all kinds of pistols and rifles. I collect both…. About a year ago, I did a video or two with the title Monster in it. That was based on the Barra electric Airgun rifle. It was an experimental thing I did with AEG M4 with the discovery of what is termed as Airsoft Practice BB’s 6mm metal BB’s. Let’s call it a 6mm Airgun for all that it became. This year, I purchased a couple of CO2 Airsoft Pistols to be used as Airguns. If they work, I might just continue to collect in that fashion. Airsoft has more guns that have that custom look like the q5 with similar or higher fps ratings. It’s a different Idea…..

@johnycash978 Bro You got that Airgun Bug 🐞 like me! 🤠🔫🏴‍☠️ You need a Channel

@JC So….. I imagine that the Knife analogy is one that adheres to function and operation of the PPQ Series as the Models exist and stand? The understanding being…. Perhaps 🤔 That if it functions fine, it’s already great as it is? So a sports action model (q5) has lightning cuts exposing the barrel could cause friction when it’s drawn from a holster? Before we move in on this…. Thank you for this comment., and thank you for mentioning this gun.. the q5. Apparently this one hasn’t (like many Airgun versions sold abroad … may never get shipped or sold in the U.S. market) unfortunately. If it does come to the U.S. it probably will either change in its configuration or looks, or will get renamed or re-branded as something else. That’s been my experience watching all kinds of videos produced by other Airgunners from different nations. Back to the PPQ M2 featured in my video. If you get familiar with my channel (you might have already noticed) .. that I like collecting In different models of the same Brand … one example would be, that I purchased all 3 Glock airguns in succession Glock 17’s Gen 3, 4, and 5 were purchased back to back to back. The reason why I say this is, because If it’s a Replica of the real steel versions, I will at least think on buying the next model that either is in existence, or will be coming out. Sometimes it may already exist in the market, and I just may not have heard of it or noticed that it exists. Anyway, the PPQ M2 is my second PPQ (I gave the blowback compact version )… With your comment now , and exposure of the q5 if it were to be offered , I might just consider purchasing it ( nice looking gun) …. But in the case of the M2 that I just got last month ( still needs a full video review)…. I may not! Why, because lately I’ve been into looking at my blowback pistol choices as Race gun conversion candidates. Maybe not in terms of full conversion, but at least kitted out in a fashion as such. That has been the plan and purpose for this gun. Now, that said….. I do like practicing the draw from a holster. One of my creative airgunning extended hobbies is and has been making a custom like holster to fit the use of my guns …. I’ve done a starter video on doing that…. Maybe it’s time to do one from start to finish. This gun might be a good candidate. Recently I’ve been shopping ready made holster that may be a better option. I happen to have a kydex model in my amazon shopping cart. The problem with buying that one, is that the M2 version as it stands does not. Have an optic pate, so I’m having to improvise using a pic rail mount for pistols to do practically the same job. That may require custom holster. If I had the q5 it would be no problem . The holster in the basket address’s the optic if plated. Long way around to what I think you’re saying. Sorry for going of the rails, your comment was thought provoking . Interesting comment JC Thank You 🤠☕️🔫

@@airgunsraider1007 I've the red dot off but the q5 match combo set comes with slim plate for other sights I think you can drill n screw pic and also comes with a decent sight besides that what I meant is I don't have a preferred holster sense I got my previous boom stick away I haven't gotten a specified one to fit most the baretta 84 soon to be coming in the collection maybe a slim Makarov belly holster would fit nicely on as well as the USP maybe the 92 I ain't sure about the issue with the q5 is I usually know plenty ways to carry including on jeans with no holster but inch n a half space between the back loops can securely handle the 92 an 1911 and as I've tested the cp99 with any slim but wide tac belt but I'm tryna not crouch n have it pop on top of my shirt when I pick something I dropped carrying the q5 without a holster inside in front of the right pocket is optionally the best way it's gonna go without one yet and if that was the m2 without a holster it may be more comfortable I been looking for kydex that may work with 92 q5 m2 and the CP possibly there is q4 that's smaller threaded and also has a sight pack I think it's also carry optional but not too cheap sense I got the q5 I've gotten an issue m2 is nearly 2 times the price of the mag that seems fair and about 100 extra for the q4 but it be hella good to get spare mag also sense the cardboard boxes I'm getting actual gun cases if you don't attend to sell any of your near feature I suggest getting blank pistol boxes good way to contain all n keep it nice most come pre cut but you can make kanthal a1 heating wire cutter n custom it for other guns too including adding boxes for ammo CO2 and I think good idea is to get Walther gold co2 also umarex sometimes the lube one and so far Im testing borner they seem like they make some guns not bad in price but functionality vs looks all plastic another gun come across my mind is TT x I think it is borner but there is working hammer slide but no blowback version there tho I been looking for other model without visible screws on the side but that one had good fps n j as well similar to swiss arms

@@airgunsraider1007 to add didn't tryna provoke with the knife part and before I been collecting knifes I've had a good bunch true them hands n I believe cheap knifes work if they well made now there is no technical difference between decent handle n guard on 440c or d2 blade between some of them old folders that didn't stop anyone to carry about them n nowadays some brands overprice even 440c blades between 56 and 60 hrc most replicas you can buy that say 6cr 18 ish go for 440 or close around and again around 58 HRC scale be as good tho like the handle n size on that one I carry something similar but folding good idea if ya looking not sure about law n all but Kershaw 007 is not bad kydex sheath clicks in good compact full Tang around 40$ ish but I'm not sure how long they gonna be out I've had an edc you cloud call it advertised as browning assisted liner lock still shaving but it still not branded I think it's the da series they have bunch tanto n classy style knifes that still handle well

@johnycash978 I really like your meticulous approach to All things Airguns …. I’m right in there when it comes to these things . Thanks for the box suggestion. Two options for holsters that might be a solution. One is a……Tactical IPSC Style Universal CR Speed Holster. The other is a universal adjustable Mega-Fit Paddle styled Holster kydex holster. I don’t own either one at this time, but these are the kinds of holsters that will allow you go house a pistol with a strait rmr attached. Dude you have some nice guns mentioned in your collection… Awesome! All three of the guns that I purchased for the Christmas Holiday “Raids” came from subscribers suggestions. So I’m not apposed to buying guns that are off or on my list. One of the guns has been on my list almost 9 years. Couldn’t find one that was made in an Airgun after they stopped making them. … however this year they came out with one… only it’s a pre order deal that keeps being pushed back. So I found the exact same gun in an Airsoft version…. So, I may or may not buy one when it’s in stock and available. Another gun that came and went way back in the day( you might own one of these) is the Tanfoglio Gold Custom…. They have a new one coming out, but without the compensator. However, they do have them in Airsoft versions on Evike. Evike brought one back into the market about a year ago ( tanfoglio gold custom Airgun) but I missed that one… the new one does not offer the full package, but the new Airsoft ones do. Like I was saying…. I’ll be able to get the best of both Airsoft/Airgun with the 6mm metal BB’s being used. They hit way harder when the fps is higher and it’s a CO2. All are blowback guns.

@squirrel Thank You for your comment! I appreciate it! So You must know my Heft preference. I really do like a meaty Airgun. The P1 I assume that you are a big fan of, and most certainly own! The price tag on this one, is certainly one that is in my range of purchase. It also meets a high standard. The chunky look is just not my style. If I were to buy another spring piston or pneumatic styled gun. I would probably consider two other likable choices the first is in the same price range, as the P1. The Weihrauch HW 75 closer to the P1 style, I am a big fan of the carved flair styled grips. The second choice would be (at half the price of both) Air Venturi V10 Match Air Pistol. All three a similar in ways, but the later for me would be a more viable choice. Reasons? First reason is that I really am happy with my Beeman P17 it’s highly accurate and way less on the pocket book. Two, the Air Venturi V10 Match Air Pistol has been on a long list of my current Airgun choices and lines up better with my Raiding Airguns on a Budget. Three …. Even though all three upper top choices fit a personal desire for precision styled marksmen air pistols, My absolute bucket listing pistol in the target shooting category would lean more towards the Olympic styled guns that would run you 3-4 times the price of any of the aforementioned pistols. With a few exceptions that are in the $500 range. Right now on my list is the..Reximex RPA PCP Air Pistol. I’ve always learned more towards the PCP pistol as a better option for my taste in Airguns. The..Ataman AP16 Regulated Compact Air Pistol has always been in my scope of preference (Any of the Ataman models would do)..Also…WEIHRAUCH air pistols have been a fan favorite of mine. Any of the Airguns listed (including the P1) would be admirable and lovely choices to have in mine or probably most Airgun collectors collections. Last but not least, a more reasonable option for my budgeted taste would easily be the..Diana Bandit PCP Pellet Air Pistol. It would be suitable for my approach to target shooting. I do not own one, I’m waiting for the Simi Automatic one to drop into the market hopefully one day soon. The closest thing to any of these that is currently in my collection ( besides the P17) would be my UMAREX NOTOS. Has plans to buy it in the pistol configuration. I’m too lazy to just buy the available extra grips for it to use it as a pistol. I would likely buy another one, just to keep from changing back and forth from carbine to pistol. I really appreciate your suggestion, I would love to hear from you based on any of these that you may own, or are considering to buy. You never know, I just might added to one of my many Airguns Listing Categories. I’ve got 98 variety of guns collected when you add the three I just purchased and will hopefully review and reveal over the Christmas Unboxing Season. Awesome Subject 🔫🔫🔫🔫🔫 Thank You 🤠☕️☕️🔫 I would really lean towards pistols like… The….Morini MOR-162EI Air Pistol If I could afford one…. That’s my ultimate style preference pistol Thanks for Watching! 🔫☕️🎄

@CaliberAirginsReviews Absolutely! 👍🏼 🔫🤠 Just Subed to your Channel hang in there Looking forward to checking it out!

@ appreciate ya. I was scrolling through your shorts. I need to get me an sig soon. They look really good

@CaliberAirgunReviews Sounds Good C.A.R.! I’ve collected a few Sigs …. I actually just Raided (purchased) another one that I’m looking to present during the holiday season. I will be doing an unboxing soon. Do you have any particular model in mind?

@ nice. Yeah I had a pre order for the sig …I think it was the p226 FDE. It was a really good looking tan model. I had to cancel it unfortunately. I can’t find it on the website I use, it may have gone or I’m wrong about the model name. I really like the look of their canebrake rifle. That’s on the wish list for sure 👍

The FDE version is an awesome choice 4 sure! Hopefully you will be able to find one. I don’t think that they are readily available in the U.S. at this time. Maybe try EBay for knew in the box offerings. Maybe they will have one, if you’ve just gotta have one. That is one that I would add to my collection in a heartbeat. Stay tuned for my unboxing videos coming up, one of my new guns is in FDE. I can’t wait to present it, I’m going to kit it out soon I hope. Gotta order a couple of things for it, yet to come! Enjoy your Day and Week 🔫🔫🔫☕️☕️🎄🎄

@johnycash Thank You for Your Comment! It’s been while that I’ve seen a Beretta 89 or the Jaricko. The Jaricko at one time was on my list when was looking for a good bottle buster with a higher fps. That was one early on in my collecting , before I decided to collect the blowbacks. Evike has that one on sale all the time and currently in its specials tab listed in the Airguns clearance section. Almost grabbed one a couple of times. Chain mags for me are good for the number or pellets it can hold, a have the Sigs X5’s that have them. Belt system mags including the ones in the Glock Gen5 ( I have) and the Walther PPQ M2 ( I just purchased… haven’t shot) are a bit fiddley, but I’m ok with them because I prefer Full Magazines over stick type mags in both pellet or Bb. Walther CP99 with the rotary clips looks like a solid one to collect. I’ve got a couple of guns that use that system. I would love to see blowback Pellet Simi-Auto use the kinds of magazines that PCP pistols and rifles use. Maybe they’ve got something out there other than the single shot Webley Nemesis Pellet Pistol that holds that type of mags. Who knows?…I’ve seen a few mods based on drilling the valve to increase the power, a lot of guys do mods like that, and I understand the reasons. I’ve always thought About changing the slide springs in some of my full metal guns. I’ve seen a couple of mods done changing out the spring. Some guys say change out the guide rods if they have the plastic ones. The only issue I’ve seen with that was cracked slides because the spring will sometimes be a bit strong for the pot metal or cheaper alloy materials often used to make the slides. That said, I came across a few Airsoft models that have actual gun parts that might be able to swap out with the same model blowback pistols that is the same model used in an Airgun. Maybe they’ve Glocks would be good for that if you can find the parts. Some of the custom Airsoft models are possible candidates for something like that . I don’t do mods on my guns, but your experience doing that is probably way more understandable than mine. I haven’t used the HN hornets, I have used the Gamo Rockets….Just got a pack of .22 14.5 for my PCP shooting. I plan to do some penetration testing with those. HN hornets are costly … but I would like to try some. I’ve seen a few rifle penetration tests on both, as I recall in some of those test the Gamo Rockets seem to perform just as well, if not better in some cases. I’m thinking that Power is important for some of the gunning that you’re possibly enjoying as an Airgunner … That’s definitely an area that I enjoy at times too. Awesome Comment JC I appreciate You ☕️☕️🔫🔫🔫🔫🔫

@airgunsraider1007 I understand the reason you don't mod there is fine line between power n spring tention equivalent to the time thee pellet exits the barell n it's not gonna gain more from more as the CP 99 o got as gift n I immediately put my eyes on the m92fs pellet n blowback but the baretta 92 a1 that also has threaded barrel and full auto as an option of the safety steel bb only sadly but I've seen that they only sell gen5 with rotary sa 10 like magasine here so I didn't go for it but I been looking for chain mag m2 and the q2 with the threaded barrel cause I've it's bigger bro and they be really similar the only m2 I seen here so far it's an rotary like the cp99 but I recently got the no blowback HK USP and I think it be good gun to tune up if I get the blowback later too but sense the mag is solid orings are bit more then usual the barell n other components be working fine easy to open n clean the mag is as heavy as the cp99 tho it feels like @_@ cp99 is also fun gun to tune up sense the only exposed terminal is the valve that's on the mag so you can get two mags n check first shot fps second shot fps them the not tuned up n see the difference beside that the iwi jericko is robust no blowback good fps I've seen a brand XACTAH or hastan that sells an 1911 steel bb or 2x8 plastic rotating mag mounted on the mag with them linked together n button to turn bottom to top kinda neat around 531 fps max the sa 9 is neat too with the vented cut slide like sa10 beside them if ya look for cp99 nighthawk comes with scope n fake moderator but plate with silincer threads same as the baretta xxtteme but there is two guns nor too famous but interesting I had look at an sig sawer p226 I think that had the m17 style 30 shot mag that feeds in like the threaded blowback version but that version uses the Gamo style stick 2x8 so I'm not too sure second is the gamo pt84 tactical cause the barrel is inside the silencer depending on the alloy speeds may variate also back to the first topic the pins been plastic may bend due to the recoil n force the barrel upward with some builds that's an issue if you are looking for another steel bb blowback I had my hands on steel bb Glock 17 no blowback under the barell safety plus trigger safety pretty stiff model stick mag with big bottom like a mag comes out good smooth painted barell too but also so far I been using the rocket expander n the match diabolo n exceed ones with the sharp tip lead bends easy but gives some power rocket kinda does booth so far looking forward to the new vids tho

@johnycash The pistol modifications fps understanding is spot on when it comes to not moding because your fps gains average between 10-15 percent. In most cases with bb and pellet pushers, but differ widely in the use of these less than lethal paintball markers that people often modify. I don’t do modified Airguns primarily because throughout my almost going 10 years of Airgunning I’ve turned my attention to the collector side of things mostly. I’ve watched tons, and tons, of Airgun modifications ( I geek out that way still) so I’m aware of and have forgotten a lot of things in the modification of these things. Back when I started, I was interested in modifications as a subject because I was a shooter looking for the extra power. I started watching a mods and chrono testing videos but never really was interested in taking the steps of disassembly of the guns, even though I have taken down and taken apart of a few of my guns for cleaning and fixing problems as we often will have to do. I’ve fixed a few, but I’ve ruined a couple. My mechanical understanding far exceeds my mechanical abilities at best. The area of interest for me is with mods happens to be in these less than lethal paintball markers that people are pushing for home defense. I’ve been watching a lot f videos since I’ve collected a few of those lately, mostly because Of being intrigued with the processes. Just as I was back when I started watching BB and Pellet gun modification videos now for different reasons. I understand the reason for the modification overall. In my case as you have pointed out… sometimes you can get boosts from the ammo that you use, and the magazine that you mentioned with the valves. That was one of the reasons that I started buying some of the extra magazines with each of my pistols. I’m not sure what country that your in, I’ve got subscribers from other countries were we’ve had some of these same conversations that I enjoy having. I’ve come across many of the guns that we discuss in videos, some of them are the same model guns, but in different iterations produced by manufacturers but sold in separate markets. I’m in the U.S. were it seems like we get guns that either are not the first introduction models, or the refined models pushed out with changes before we get them. Many models that people in other countries get sometimes come to this country way after the concepts are introduced. We’re not even talking about the regulation differences that exist in some countries based on fps and joule ratings. Not sure what country that you are in…but I own some of the Beretta examples that you’ve mentioned. Except for the 92fs.that is one of my favorite Beretta models … The one in chrome with the wood grips has been on my list now for almost 10years. The price for that gun has been over $200 US. and continues to be the same price for years. It’s one that is finally had a few dollars price drop, but not much. Back when it came to my attention I could not afford that gun. I have purchased all kinds of guns over that price point in my collection, but that one …. When I get one will probably be the one that I will collect and will never shoot once I choose to pull the proverbial trigger on.

@@airgunsraider1007 I liked the silver and as usual the black the a 1 tan n green look decent too but I wish I get my hands on the old silver tactical that had the barell threaded on the gun it self now there is an adapter for that to screw over but that gonna ruin the paint n my q5 slide got ruined by my belt buckle n I understand the point I fully clean the cp99 didn't get time for the USP but sometimes it has left over powder coat or some black residue on the inner side of the slide n some parts from machining usually I haven't ruined none yet realised the no blowback USP has 4 wholes on the valve but few o rings n it's rated 3.5j I may dremmle carefully two of them not too much over the original to not also ruin the o rings and I may need spare ones I was thinking behind the blowback chain mag on the valve pin there is plate to change the rubber seal around the valve pin with screw on the bottom it's optional to get me itchy but if I find matching valve that has no eholes to exit around the pin that may turn the q5 no blowback I realized I can drill a plate not bigger then the pin n put it with another type of seal behind the plate with the screw but that may brake too cause there is good enough pressure and cast steel or pressed aluminium or metal ain't too hard alloy but as collector I understand your point not editing or modding keeps original stats no extra tune ups or new sets of rungs often no mag CO2 seals leaking n etc getting Spares is deffecult sometimes n you do loose shoot count per bottle by tuning the power up also that may effect the seal as well I seen broken valves n kits for pt85 too here bellow 16 to 21 j you don't need but you can register but to carry in public n them not tryna take to test it n make sure it matches your papers on j and etc it may be around 12 j max I seen self defense guns that shoot around 8 j still working not tryna benefit of alloy n ammo but original shape may maintain better lead gets more impurities in the barell I've noticed cleaning the cp99 after 180 pellets it took a bit even there was some in the inner parts so Gamo expander or any HN cooper plated may leave less tention in cleaning but I prefer aluminium or other alloy to not get the rifling ruined I believe the rotating mag versions like cp88 cp99 the 92 FS that I do adore allot the hk vp9 kinda don't like it's safety but works and little newer smith n weasson mp40 that works like the cp99 but it's polymer may last longer n be good to collect but get spare parts when available if possible a barell too after enough rounds or time it may get ruined but I seen some decent quality looking haven't yet tested models still pooping in the list like the p226 x30 chain mag like the one the sig x5 n m17

@johnycash978 Found your channel and subed. So what country are you in …. Sound like you have restrictions. Also with the mods that you’re doing, you could start a channel. Thats the kind of content most Airgunners gravitate towards. I like the tan 92 as well. Like of the guys doing mods are usually ( not always ) ex military or guys with firearm experience. Sounds like you’re in one of the two lanes. Some are tinkerers, some are mechanical inclined of some sort. Were are we in the matrix of things? Some who really get into these things have created there own lanes like Donny FL and Hajimoto production channel become experts in modification and eventually get popular and become in demand for Airgun modifications.

Thanks for the heads up JBG …. I know you buy a lot of Airguns and trust that you know about these things. I’ve got the ones that I wanted @ the time. I like all kinds of Airguns like yourself. Wish I could collect some of the ones that you have. Some of your purchases have influenced my choice gun decisions in this Christmas season for sure! Thanks for the comment, and I always enjoy your gun choices and content! Good Stuff 🔫☕️☕️👍🏼

@JBBG 😎I hope you got great deals on them both! One optic and few Airgun items and a few guns purchased. I’m done for the season….. one item I should have waited on for Black Friday, but you win some… you lose some ☕️☕️🎅👍

@SavageAirguns Thank You! Checked your Channel out …. Cool 😎 name … Cool 😎 looking channel! I can’t wait to check it out!

@ThomasJay723 Thank You 🔫🔫🔫🔫🔫☕️☕️

🔫🔫🔫🔫🔫☕️☕️ Hope You had a Good One! Up Next 🎅 🎄 Always Fun JBBG! Enjoy the upcoming season

@TtGS Thank You for the Compliment! That was a fold foregrip with a tucked away bipod (inside the grip). It was a modified from photography equipment parts. It worked well for what it was. I no longer have that Airgun. The gun stoped working and a gave it to a friend to fix and use. Replaced it with an Airsoft GBB SMG-8 By WE Tech gas blowback sub machine pistol.

@jonnymak I had to check the Zorak out…. I’m not familiar with the gun by its given name, I have seen it before… or something like it. I’m thinking it’s one of the ones I’ve seen in past videos…..and providing that it is the pneumatic pump pistol that shows up when you google it. Awesome looking target pistol if it is. Awesome if that is one in your collection 🔫🔫🔫🔫🔫 I like it! Also…. Your name is familiar to me…. There is a RUclips Airgunner who goes by the name Johnny Mak ….Even though your handle leaves out the H. Like his channel for Airgun content I’m subscribed to his channel under another handle … but will go back and subscribe under AR, If you get a chance go check his stuff out. You might like his content as I do. I’ve been into PCP for awhile now, If by chance you ever decide to start to collect any….. I would recommend an electric pump… I use to use a hand pump that I quickly got tired of using, even though I still use it on occasion. The electric pump is the way to go!! Also! Now days you don’t have to start out paying premium prices out the gate. You can get into pcp pistols or rifles as low as $150 U.S. dollars these days upwards to 3-4K if you have that kind of budget. Thank you for sharing! 😎☕️☕️Stuff

Back in the day about $95 US No longer available

@ilija I think you mean PFAM9B unless I’m mistaken Those use to be around all the time. A Quick Look shows them at Crosman website and Amazon. Cheaper on Amazon

@@airgunsraider1007good news I found it lost receipt but that’s ok still in box never fired,lately I just have been using WEP that gun is amazing but yes3 mags occasionally jam but easily fixable,you know I have 226 but NP,,,,so what can I say it’s your money,you can get XGB for $40 it’s all up to you but Springfield Armoury 1911 don’t buy it,that’s just me and my observation

I’ve got the XBG in the Tac..Definitely a good buy. I was just thinking about getting the Springfield Armory XDM… 4.5 .. I really don’t want it in black . got the XDE… in black. The Black XDM is cheaper but I want the two tone silver. Maybe not if the 1911 is not good. Thanks for the heads up!

@WillH Thank you for clearing that up for me…. Always wondered if the lower rated fps in a different caliber made a difference in countries like yours. Even though .22 are more powerful… the numbers really do matter

@@airgunsraider1007 yeah i reckon the.177 will tip the scales… and as silly as it sounds anything in the uk air pistol scene that is more powerful than 6ft lbs has to have a Firearm certificate and for a rifle it’s 12ftlbs… but it’s still enough for close range hunting… I’d love to live in the US you have some awesome airguns… I particularly like the look of the air shotgun by gamo that i watched a video of…..

@Williamthehedonist This is great understanding for me… it clarifies the information that I have kept in my head from countless RUclips videos I’ve watch based on my fellow UK Airgunner. Many have spoken on the subject of regulations and laws that you have to follow to Airgun. I pick up videos sometimes on a random basis as well that speak of these things. In example…. yesterday… I did a final Raid on an air pistol for my Christmas shopping. I purchased a Simi/ Full auto pistol that I watched bunch of videos on before I pulled the trigger on the buy. In one of the videos, an UK Airgunner featuring that exact same airgun pointed out the same controls on the gun that I was thinking of buying and said “ Unfortunately we are not allowed to use full auto in the Uk” sometimes you hear these details, but they don’t seem to be understood until you come across the type information that you are sharing in this comment. Thinking now about what your saying about the foot lbs of energy required to take game with a sub fps gun used in the UK. I did not know….. I’m not sure if It was a comment from you, or someone else that I recently answered about the fps needing to be above 700-1000 fps as a standard base rate for animal dispatch as taught by many Airgunners in videos over here. Those numbers seem a world apart now settling in my brain. You really do learn something everyday! Thank You for sharing…. Good stuff to know 🔫🔫☕️☕️

@Williamthehedonist Also thank you for watching and enjoying some of the Airguns that I collect and post. I really enjoy having fun collecting these things. You comment is appreciated

@@airgunsraider1007 your welcome friend… if you were a fisherman… i’d say tight lines….i’m not sure what I would say to a fellow air gunner…. “safety on” or “EAST” (Eye Aperture Sight Target)….

Thanks Indiana 🔫🔫🤠🤠☕️☕️ I Appreciate That Sir!

Thanks JBBG 🔫☕️

@ WThehedon 😎🔫🤠 I hope you enjoy both guns when the time comes. The 1377 was always available at my local Walmart before they stopped selling pistols. Back when I purchased these two … I could no longer walk into the Walmart and buy the 1377.. So I decided to do something different and order these

You’re definitely correct about that one YOLO .. You Only Live Once… Might as well enjoy what ever you have on hand and just have some fun! 🔫Thank You for the collection comment, and I appreciate you for watching ☕️🤠

@MQ Sounds like a survival situation! Thank you for sharing what you collect. I like your see Airgunners enjoying upgrades to there Airguns . I don’t do a lot of that myself, but I’ve watched countless of interesting videos of gunners who do. That’s a hobby thing for me as well… Glad that you enjoy the Hobby. It’s enjoyable for me as well

🔫🔫☕️☕️😎

@jasonnealey I’ve never tried to look down its barrel. That sounds interesting, going to have to take a look. It looks like it might be threaded .. but I’m not sure. I put a muzzle break on Big Bang M4 about a year or so ago. Definitely was a welcome change for the look of the gun. I think it it required a 14mm negative fitting at the time…. I can’t remember.

@BYD Fun Too….. I like putting on some some symphony music and turn off or turn down the lights to shoot with them. I have a few of the ones made for the situation, but the cheaper ones aren’t as bright so it helps to challenge precision just a little more. When use the illuminated scopes it’s Awesome! Enjoy your Weekend BYD!🔫🔫🔫🔫🔫

@JBBG Sorry About that… something was set wrong in my Studio…. I think it’s because I was using Studio from Crome and I did not sign out. Kept saying my videos were set to private … Anyway…… able to send a response. Sorry! You’re up late! I got out my posted video…. Headed your way Bed ….. Gotta get up early………. TTYSoon I Hope ☕️☕️

So ….. In the beginning, my videos were structured to inform viewers of details on the guns type’s and mentioned. The details of the guns the metal that the guns use, the ammunitions weights and products names. Sometimes I will mention these things. One again there is a reason for not doing the linear stuff that you see on every Airgunners channels. I’ve watched countless numbers of videos doing the standard production of Airgunners videos. To that I always….. direct my viewers to go watch those channels (as I do, and continue to watch on a daily basis) …… My channel is made to be not those things…… I’m the peanut butter eaten from the spoon…. no bread, no jelly….. it is what it is! Why? Might you ask? The answer is found in the aesthetics of video production as a whole. My approach is an overview. and not the review! Its form over substance….. It’s the unfiltered product… It’s raw in its nature…. It’s like eating the onion and not the sandwich with the meat … the bun..The condiments…… Bite into a raw onion and start chewing…. That is my essence!!! It’s not a proving of anything….. It’s Never just one thing! But yet! It’s all that , that you’re talking about and more! Think about it like this…. You ever watch the Airgun videos ( standard practice thing to do ) where you choose a pistol or a rifle to shoot into ballistic gel? You see the penetration of the projectile …. You’ve gotten the shapes of the pellets, before and after the shot is taken …. If you’re lucky and the tester feels like it…. They will measure the thing with a ruler for depth…..but you never get the mathematical angles, projections, or the scientific values of the testing in such away that it proves nothing more than the point of impact or travel! Apples and Oranges are Great!!! But what about the kumquat?… or tthe relevance of the idea demonstrated? What are we trying to Prove? This is Not meant to be a negative point of reference….. I’ve watched countless videos of my fellow Airgunners doing these kinds of pellet testing as…I’ve even watched a video where the Airgunner gets the heads of Real Pig 🐷 and shoot into the object just to prove the same ballistic point as with the use of the gel! What exactly was the point that We are going these lengths to try to prove and or try to provide in showing the details that you ( like you are wanting in this comment) looking for? What is point of providing you as the viewer the specifics of something that you may or may not plan to use? There are plenty of videos out there to watch on the same Airguns that I am presenting. Go watch …. No binge watch them, as I do…… I Love to see the precision and details of the models and the product descriptions…… sometimes like I do while eating my breakfast cereal ( I read the entire box before I eat one spoon)…. Soggy Oats and everything! 😁 Hey…….. Don’t kill the message or the messenger! Anyway…. FYI = is Something….. that one might say at this point…. I’m sure we can figure it out 😈 unboxing and sharing stuff is a part of my Channels values (I Raid!!! Buy Airguns, and Airgun, Accessories to present to my viewers …. I am a Collector of sorts!… It (unboxing) never gets old … as far as I am concerned. Yes it may Suck for some (You)…… I get this type of feedback from time to time….. I also get Feedback to the contrary…… Either or Neither nor! Sorry you don’t like the openings of a box …my friend! I got a few more Unboxing’s coming up next…… 😡😶🫤😖😕😛😆🥹 So……Stay Tuned!!!😁😂😅🤣 All Jokes Aside! Your comments are always welcome! Communication and dialogue is a priceless Commodity!!! One that I hope we will continue to explore and have 🙏🏽☕️☕️ Your Welcome to ☕️ and some 🔫🔫🔫🔫🔫 Any Time! 🤠

@seanbrossard Thank you for the tips… I appreciate your watching and Keen observations…. Definitely on point! It definitely shows that You Love ❤️ my Videos 🎥 I do happen have the equipment that you have mentioned. I also have a stabilizer that I have in a box …and has yet to be used. It’s been a production time constraint problem for me. A lot of what you’re talking about like scripting is in the beginning stages of being used. It’s going to take time to become a standard productive habit for me …What you’re seeing in my videos is me… self honing my craft …( this is my way of..creatively producing my videos)…backwards learning intentionaly……. Im working towards abstract video presentation and upside down reasoning skills…….Not working in a traditional linear format or approach To Airgun 🎥📷📺 It’s like reading a book from back to front. Working backwards … It’s my way learning a thing…….If you’ve noticed or have gone back far enough in my videos…., you will see no rhyme or reason for just about a great deal of what I am doing in my longs, mid range vids, and shorts…This is by design……What I am presenting will probably never be as the conventional or the normal way of video production…….This is about showing the warts in a videography journey …..that will eventually become artistic masterpieces in the long term ( I hope) someday!!!. It is me being film maker…..enjoying my own take on all things Airgun filming, editing, unscripted , and exploring creativity in every aspect of the totality of a thing!…..The goal right now continues to be experimentation in its highest form……The content side of things is just a part of the bigger picture in the scheme of things to come. I’m just throwing spaghetti at the wall on purpose not even trying to make much of it stick! I Love the work involved and the results that bring in a comment or two (such as yours) I like that Nothing is cohesive… ( nor is it meant to be right now)….. it’s more about variety ( not a good thing if you’re chasing the algorithm)…..Think of it as …..polishing a rock until the jagged rock becomes a smooth stone. The stone will eventually become a bright and shiny diamond. 💎 If your around for the long term……please come back from time to time in future…. My goal in all out production this early is set for a 5 years time period … That’s about what my timeline looks like in order for those kinds of techniques to work and take effect to become more enhanced and become of value. I’m on a mission to build a different ship to travel in….. It will never be as what we know as Airgun content as we know it to be…….it will be a little bit of this, and a little piece of that, it’s a stew, or a gumbo …. Not a meat and potatoes platter!!! That’s another reason why I say “ Collectjng Airguns is fun!!!” I’m challenged by everything I do …. Not for the pleasure of the viewer ( that’s a relevant component), but for my own pleasure and amusement! Thank you taking a ride on the Mother Ship …. Baby Bubbaaa ……. 🤘guitar soloist is my thang 😎🎸Very good observation!!! 🤠 I would love for you to weave through some more of my older videos…… like the Fantasy Airguns stuff. Creativity is my muse with editing, video production, and my off the wall channel style….. Gratitude for the constructive criticism and critique….. I’m aware of the lag times in my videos. The longer videos are meant to do that as well…. That’s me rehearsing for Awesome videos to come!….Sooner or later I plan to lace some of my videos together with not related materials …. Like much or the house hold elements cups, artistic figurines, and lately music in the background. Just more experimenting to eventually settle in on a more unique style. Think of it like this……. 🙂🙃 Great Comment!!! 🔫🔫🔫🔫🔫☕️☕️

That Would be Awesome @JBBG!!! 🔫🔫🔫🔫🔫 So 😎 ☕️☕️ I look forward to it whenever you’re able…. It will be more than an honor to have Johnny, and a great cup to receive!!! It will be a coveted cup and used as my primary coffee cup 4 sure 👍 Let me know what I need to do in order to get one! Appreciation 🙏🏽

Hey JBBG Your comment is set on private …. Can’t respond. Hopefully you will get this one! I’m good !!!! Working on my latest Video productions … Hope you’re doing Wellb! 🔫🔫🤠☕️☕️

I can certainly see the reason that BYD…. Hunting for knife started giving me Fetish vibes in terms of desiring to buy. Quite few made the cut. The other ones based on the Logo just Fit the cause! Thanks to you My Friend 😒😆…. I’m going to get in trouble with my wife, because I now have to collect at least two more of the four different blades, different colors but the same logo. Talk about addictive! The cut wasn’t deep enough…. “I don’t have time to bleed 🩸” He He… One of my favorite movie lines ☕️🔫🔫🔫🔫🔫 Thanks on the Hatsan …. Here’s some Trivia on the red furniture. The red scope mount and the bipod was purchased to be used on my Notos … that was until I had overlooked that the Notos did not come factory with a bottom rail. Didn’t feel like doing anything to modify it to work . Also, my plan was to change the grip with a piece that I found to match close to the Edgun Leshiy 2 because the Notos reminded me of one on a budget. I abandoned that notion…. I was looking for something different to do.

Something’s seem to be like that with me too Indiana!!! Glad you somebody can relate 😆🤣

🔫🔫🔫🔫🔫 Watching some of your videos got me excited about this one ☕️☕️🤠

@JohnnyBBGunner2136 ☕️☕️🤠 Thanks Johnny If I had of been thinking about the road Of collecting back when I purchased it. I might have ordered a few more builds of its kind. Unfortunately I did not…. 🙁🤠

Hey@ FLA LL I Appreciate your comment…. Can you clarify for me which videos you’re referring to .. So that I can understand what we’re looking at and talking about. It sounds like I might have miss spoke on something. Also please elaborate more on the Japan Copy’s…. That sounds like we’re calling into a specific issue. I would like to correct anything that I’ve personally done wrong If there is a specific issue l! When you get some time to exspound….. I would appreciate it… Thank You 🙏🏽 in Abvance! 🔫

@airgunsraider1007 It's nothing at all you've done wrong your video content and markers are sweet. I shouldn't have made the comments I made. It should have been a private conversation for sure. Those are very nice looking. I can say that certain ones are made by these places to be used for other purposes that are nothing to get caught up in. Just please be careful who and where you deal with. Not the place to elaborate any further My Brother. 😎👉💨💥 Keep doing what you're doing it's great 👍

@@airgunsraider1007 I appreciate your respect in your response alot would have responded way out there. Much respect!

@FLAlesslethal I appreciate your watching and respect your viewpoint. Everbody will share facts, and opinions. I’ve got over 1000 videos produced, I’m bond to forget or cross reference. I’m just an old 🤠🎥 trying to enjoy my collection hobby and have a ☕️☕️conversations. I just checked out your channel and a couple of your videos. I sometimes will go over to Airgunners channels and support when I can. I’ll leave a positive message or two. When I’m able I will binge watch a lot of their videos, I learn a lot from watching. Something I’ve been doing now going on 10 years. This is only my second year doing RUclips. Airguns collecting is my passion. I’ve watched gunners from Airgunners, Airsoft gunners, Paintball gunners, and Less Lethal gunners to help build my collection of over 95 varieties of hobby based guns. It’s just what gets me going as an enthusiast. I’m no expert in any of these areas, (I’ve watched hundreds if not thousands of hobby gun videos) but since I caught the bug spent a lot time and money on these things…. I decided to start a RUclips channel. Everybody brings something different to the table…. I like your… Less Lethal Scientific … approach. I’ve seen a few channels across the board that have done well in this area. I can’t wait to see your growth in this area too. Congratulations on Your Channel!!! I’ll go back and hit notifications so that I can visit from time to time. 🔫🔫🔫🔫🔫☕️☕️

@ Welcome to my Channel….. I look forward to continuing to watch yours as well …. Thanks for views and advice! Keep on Hobby Gunning!!! 🔫🔫🔫🔫🔫☕️☕️👍

One of my last Videos I had Two projectiles ricochet …… Back to back pellets Not Good!

Great To see You BYD Hope you’re holding Well!

@Marioromano6555 Sad …. I got that one in 2015 shortly after that they shut down with plans to return. I think that was back when the company was transitioning based on Benjamin. It took several years to return I got a notice in my Email sometime in 2022, 2023 they reopened. I had plans on building another one around that time,checked this year looking for a Christmas Raid and they were Discontinued (as you are in confirmation) Unfortunately! I was Looking to build 2 more customs. Thank You for your comment, and reminder…. I appreciate that for sure! 👍

Thank You Sir! I hope you’re doing Well! I’m looking forward to putting it together and Using it. Always good to see You! I know we’re all busy this time of year.. Thank you for chiming in! I’ll be headed over to see what “OL Hanks Got Going On..” Soon! That’s one of the best tag lines I’ve heard on a Videos …. You got stuff I can watch All Day. Hey, I hope to binge some more of your vids coming up over the Holidays. Mater of fact, I’m headed over to look at your collection video on my way to bed. I love seeing all the guns Airgunners have chosen and enjoy ! Have a good Week Indiana!

@squirrelatwork You Absolutely do in my Book…. I’m glad that you’re enjoying them …. I definitely enjoy the ones I’ve collected. I also agree with the details of your statement. Walnut and Steel is a good channel on RUclips that has an excellent collection. You probably are aware of his channel, he has a good mix of just about everything.

Both are have the same fps ratings, not sure of the ftlbs that it has I still need to shoot both and chrono test each

@jimmygarcia8851 Awesome! The Bertta PX4 Storm pistols are my #1 Desired Firearm pistol if ever I should choose to own one! Thank You for sharing your experience!