Видео

This cpu was not binned chip , random only buy it sp 78 good sp cpu... other my binned cpu is same 79sp also same score on cinebench r23 10min 27768 ,but now my cpu is using more up voltage use 1.340v this video was i think 1.28~1.290V very good cpu all cpu was none delid however my 14600k cpu have some of sa voltage freezing on 1.260 up using g.skill 7800cl36 adie @ 8200cl32 now ruclips.net/user/shortsRVdyS8QanyY?si=I2QRAzrvdbDL5xt2

First, the possibility increases if the RAM temperature does not exceed 35 degrees, and second, try using the SA voltage that can be used for invitation. If the RAM temperature is high, you should cool it with a spot cooling fan such as PHANTEKS T30 at 2000~2500 RPM and 10 mm away from the memory

Yes, that's right. In terms of yield, RAM overclocking can be done better in the order of i9, i7, and i5. In terms of overall SP yield, i9 is the best

Running it for 6 hours seems crazy, it seems like a reasonable amount of time to set the standard as usual and not have any problems in real-world usage. If you see stabilization at 6 hours, and someone else says 6 hours is not enough, you may end up in a stupid situation where you have to compromise more than that, Some people say that you should measure ycruncher vst vt3 instead of Karhu In my personal opinion, I think you can use memtestpro 400% very stably

@@Hwbot-Philip-Park VST or VT3 does not test memory, rather IMC. For memory tests there is TM5 or Karhu. Show at least a full 1.5 hour Extreme@anta777 test and we can talk about initial stability. Memories can fail after longer testing. Besides, such tests should be repeated after restarting the computer several times and new training.

@@JureczekMega It is difficult to show you all the parts I measure in a video. Usually, I test with tm5 first, then reboot and test with memtestpro at 200%, then reboot and test 400% or even 1000% or tm5 100 cycles. For CPU test items, I use 25 types in Hwbot and 3dmark in parallel. I agree that vst and VT3 are not memory tests. Please refer to my other videos. I am an overclocker who runs up to Ln2 and I was ranked 1st in the world in the Novice league when I first started out. In my experience of doing RAM overclocking for about 4000 hours, I think it's best to run tm5 and Memtestpro in parallel and finish with ycruncher pi-2.5b. Karu doesn't use them

안녕하세요 제 영상중에 12세대 CPU는 SUPERCOOL 태국1세대 제품이였고요, 이후 13세대부터는 위제품을 조금 사용하다가 신제품 ICEMANCOOLER (알리나, 토리시스템즈) 제품의 다이렉트 방식 제품을 사용하고 있고 현재도 사용중입니다. 성능도매우 좋고 장착도 편리하고 타사제품 곰제품이나, EK제품처럼 하자가 있지 않아서 많은분들이 사용하고있습니다. 가격도 상당히 저렴하고요 ( 위와같이 번거로움없이 탈부착이 가능하여 매우 편리합니다.

@@Hwbot-Philip-Park 답변 너무나 감사드립니다. 잘 참조해서 제 14900k발열도 한번 잡아 볼랍니다^^ 아 아이스맨쿨러는 토리에서 구입신청해놓아서 곧 도착 할 것 같네요. 나머지 필요한 수냉제품들도 하나한 준비하고, 있습니다. 수냉 안한지가 꽤 오래되어서, 다시 하려니 모르는게 많네요. 곧 출시할 인텔 TSMC 공정의 에로우레이크?도 기대하고 있습니다. 역시 취미로 가지고 놀기에는 인텔이 좀더 좋지 않나요?^^. 다시 한 번 감사 드려요.

@@hyeongjuncheon8068 넵 아무래도 가지고 놀고 Oc하기에는 인텔이 재미나는데 이번 15세대 285k는 저는 잠시 보류하고 내년 2월쯤에나 285ks제품때나 구입하려고합니다 워낙 14세대 불량이슈가 커서말이죠 램워터블럭도 같은사의 제품 토리에서 아이스맨다이렉트제품이 현재 1티어제품입니다. 아이스맨제품은 항상퀄리티가 최고입니다

@@salamizone yes 90% all my cpu is delid it

Same 4090?

@@Hwbot-Philip-Park no my GPU is 3080 but my average GPU usage is below 58% so The GPU is getting bottlenecked significantly. because my gigabyte z790 Aorus elite is bad it can't even run 2x32 64gb 6800mhz xmp. I'm thinking of buying an ASRock z790i lightning but the z790 is a dead platform.

@@Decki777 on my channel i was use little time Gigabyte z790 mainboard was 1% low frame is not good performance it It may vary slightly depending on the board manufacturer, but in my experience, MSI was the best, followed by ASUS, ASROCK, and GIGABYTE boards had very low scores of 1% and 0.1%

@@sakamata7 真夏の5800mhzは非常に安定しています

@@Hwbot-Philip-Park 당신이 원하는 경우에만 당신의 BIOS 설정에 대한 비디오를 만들 수 있습니다 asrock z790i 읽어주셔서 감사합니다

Hahaha I want to do that too, but I'm not good at games because I'm turning 50 next year

@@Hwbot-Philip-Parkage is not a problem gaming is not about age it's all about having fun. You are playing pretty well.

@@Decki777 The FPS aiming point is too shaky now compared to 20 years ago. Have fun

넵 맞아요 칠러에서 나는 소리보다 아래 에어컨에서 나는소리가 더 크고 그보다 조금 작은 소리가 칠러에서 납니다. 둘다 빗스한 소리가 나는데 실외기가 조금더 크게 납니다. 징 징 징 소리가 나는거는 칠러를 저기위에 올려놔서 그렇습니다. 수평을 못잡아놔서 - 근데 방안에서는 쓸정도이 소리가 못됩니다. 매우 소리가 크고 기본 800W 정도의 전기먹는 하마라서 저때이후 사용을 전혀 안하고있습니다.

@rv7768 hello guys this video on use Hynix ddr5 16gb x2ea 5600mhz CL46 green ram use it

No sir it was 7800cl32 is stable it 8000cl32 is unstable when it Tm5 10times 50minute happened 2error. I think motherboard Oc ram limited

@@Hwbot-Philip-Park yep that's what I thought. The hero cannot do more than 7600 stable. 7800-8000 might be bootable, even with loose timing, it's not stable regardless of your voltage settings. It's a teash tear 4 dimmer and overpriced as F**k.

@abzaman77 in our country custom water cooler with direct die can make stabel 2user 8000cl34 but he was gold 0.1% good cpu use it so I try it but I was Aio 360 water with Air spot ram cooler use however new Hero model mak 8000

@olivierg423 sorry sir I dint experience use F6F bios It was a product that was assembled by an overclocking agent.

@olivierg423 please check this video I think sa voltage on there same

yes bclk 100.25 is perfectly bus clock 100 same , and vdd2 is (1.490 ) mc voltage and cpu vdd is asus dram vddqtx voltage it (1.410)

YCRUNCHER test program PI1B, 2.5B ,5B and VST VT3 all need low water temprature , i have mora-3 420pro dual pump and outside balcony ambient temp is too low on winter season... i am using cpu core direct water cooling it stable on 480w

monitor is all black not showing anything but pc is running. I checked all wires and the monitor is working fine bc I saw it glow up with the display port

@@TonjeStrmsheim motherboard battery removal 10sec and. Re intall it boot again

@@Hwbot-Philip-Park I fixed it thanks🥰

Unfortunately, there is no search function on the major Asrock motherboard. Enter F6 EASY mode and set MOS to about 30% in the FAN control menu

@@Hwbot-Philip-Park do you know where power down mode for ram is?

@claysmedz287 i am not understand what is power down mode on off ? Led?

@@Hwbot-Philip-Park power down mode is a ram setting that turns off parts of the ram when not being used. It’s a feature on Msi motherboards maybe Asrock doesn’t have it idk. It increases latency.

@@claysmedz287 ok i under stood it maybe not have and asrock bios also inconvenient because there is no search function.

영상아래 더보기란 설명란을 보시면 자세히 설명이 나와져있습니다.

@garethtaylor8018 are you mean use 7200xmp ram but when you booting on windows it was 5600mhz mean? If you use bios default it's correct. Use 7200mxp profile boot on

Did you comment without watching the video? It will appear if you watch the video.

There is a more detailed explanation under the title. There is a more detailed explanation under the description. It was used Hynix Adie 5600mhz green ram 16gbx2ea 081n Unlock

@@Mr.RobotX you are welcome brother have a nice weekend

It wasn't mine, it was the person who had entrusted me with the overdraft, and I remember it was SP 108 I am not remember what's pcore ecore and mc sp ...

@@Hwbot-Philip-Park thank you for the quick reply, I was trying to replicate your settings, and it was kinda different for me to get 8000MT's on the same board!!

@@benuten3907 Please note that this is for reference only and may not work in many cases as it varies depending on the CPU yield and RAM yield cooling environment.

@@Hwbot-Philip-Park yes I am fully aware, I was just getting some points on where to tweak.

@@mythbuster4315 you can see on my channel many other 14900kf issue cpu vids benchmark data

I would like to continue my conviction of not using AMD since the Athlon 3800+ in 2005

@toonnut1 only picture this video. I haven't capture board i try it but capture board is not good working

@Hwbot-Philip-Park thanks bro 👍

You can search on my channel Gigabyte pro x overclock bios guide it was LLC Turbo setting cpu is 1.280v. Tm5 on Max cpu tdp was 112~170watt

Lastly, while measuring AIDA64, the video recorder often stops when shooting with NVIDIA EXPERIENCE. The resulting value is replaced with a thumbnail photo and comes out to be 47.4NS some of Nvidia experience record stop when test aida64 this video The thumbnail photo is the result

@@Hwbot-Philip-Park impressive man. I cannot even get 7600MHz stable but that's on a Gigacrap board so it should be expected lol.

@STEELFOX2000 thank you for visit

@STEELFOX2000 what aio cooler use it is that thermerlight is air 1fan cooler? 1 1.68v is too much dangerous voltage

@FotonPC no sir other friends use 14900ks Pcore 6000mhz nomatter over 400w