DIY-FIXIT
DIY-FIXIT
  • Видео 288
  • Просмотров 1 319 009

Видео

How to installing a switch outlet combo where there was only two switches in a double gang box.
Просмотров 402 месяца назад
First thing is first turn the power off and use a secondary light source! Next there is the patarn or way of connecting wires. Remove hot wire first, second nuteral, and last load if there is one plug. Re-install in opposite direction. You should see the poor job done by the original installer. Very bad because it's dangerous. Can actaully lead to a fire! If you see any thing like this either c...
Me changing a shrader valve on a fully compressorized system! HVAC R-410A
Просмотров 412 месяца назад
I was questioned about how this is done and haven't reccomended another to do this proceedure since it is dangerous and we can be fine over 42,000 per day because of a refridgerant leak into the air!! I apologize about the portait mode since I didn't have a tripod but the proceedure is here. Just please be carful of the pressure and not to release any gass!
2018 Magic chef , RCA 3.0 washing machine E3 error code fixes. 3 ways. + Hinges / Pump replacement.
Просмотров 1313 месяца назад
AT YOUR OWN RISK. These repairs aren't easy. I'm not a appliance repair person. I describe and show three different ways on how to repair E3 error code. First was just by moving the lid and a direction while it was closed. Second was using magnets. Third by by passing the lid sensor or switch. The last one is what this video is about. I also have a video changing out the water pump and replacin...
How to use a Key cutting machine. Should be copy and blank. Paid for it self a time ago. Grate Full.
Просмотров 456 месяцев назад
Despite any misinterpretations The information is correct. Should be Key, or Copy and blank is the one being cut. Most will have a manual machine like ours and this video can help.Using the same method and being consistent is best method!
Install double gang box from 3-way switch. Explained and shown. Switch on circuit work both outlet
Просмотров 776 месяцев назад
Ok, this was a bit more difficult than expected, although the video is 15 minutes long took me long to get job accomplished. If you are unsure about 3-switches and how they work, take a look at the link here in the description and you should understand much more about this type of circuit. Hope you enjoy and to see you on the next one. ruclips.net/video/bpoh1omdZ6E/видео.html 3-way switches and...
Klein tools the best in the business. Although I left some out you can't do wrong with Klein Period.
Просмотров 387 месяцев назад
OK, I can add to this video easily with links that are recommended. Klein tools are the best in business just slightly underrated.Please look at my Playlist and video search my Klein products as they are the best in the business and professionally rated! Just because I use Knipex, Klein, Rigid, Milwaukee or any other tool means they serve there purpose, hope we appreciate them all. studio.rucli...
Changing a flame sensor on a furnace and why. Most common fix on a air furnace. Special link below.
Просмотров 827 месяцев назад
There's always a lot more going on than meets the eye, when it comes to repairs. So pay attention. ruclips.net/video/5he9m_FKI_4/видео.html link on how to check a furnace properly. I'm not a expert but these are very helpful tips.
I have no Heat what do I do ? How to check a furnace system. And tips on ways to keep more heat in.
Просмотров 449 месяцев назад
I hope you guys enjoy this video. Here I illustrate on ways to check your furnace if it's not working. This video could help others find solutions and save money. I have been doing this at this site for over nine years and working with other systems in this field for over 27 years. Not every fix is easy but you would be surprise how you could fix your own system just following these tips. rucli...
RCA / Magic Chef 3.0 E-3 error part two Changed hinges and Bypass lid switch, remover cover & fix.
Просмотров 1,1 тыс.11 месяцев назад
This job was more difficult than intended. But most of the information should here for your assistance. I remove the door first then find the four screws that allow to cover to be removed, two at back and two towards front on the side covered with little round rubber covers. I also show where the hose goes to the pressure switch since it came loose on me. Removing the lid or door first aids in ...
Nija Digital Air Fryer Toaster Oven 8 in 1 foodi, underrated possibly because its shape and size.
Просмотров 198Год назад
I prefer the simpler the better and needing more than the 1800 watts on the unit or its 8 features I think this is a great unit. A taller unit will work better for larger items if this is part of your needs. I paid $ 190.00 out the door at best buy today. Hope you guys enjoy the video and let us know about you suggest stories and how you use your unit. I guess you noticed I didn't read the inst...
First use M12 Fuel straight die grinder vs Rotary tool and accessories.
Просмотров 7 тыс.Год назад
Number to the newly announced M12 Fuel brushless Rotary tool is 2520-20, bare tool. No price as yet? Few things I didn't mention in the video, The light works better on this tool vs the angled version because of placement. Next to the collet instead at base of unit. Second one is very important when installing the collet make sure the inner part is inserted in the lock nut, Also the when removi...
My first video charging R 410a This is a simple method other use when only minimal amount is needed
Просмотров 123Год назад
A much more precise method would be to connect gauges to both and hi and low sides. The low side is the suction side and this why we charge the system through the low side. There's also super cool and superheat methods the pros use. Other times we suspect compressor issue and definitely connect to both sides of the condensing unit. The compressor sounds differently when it's low on gas a bit lo...
Milwaukee M12 Fuel brushless system Best overall on the planet 12 volt system for the masses period
Просмотров 837Год назад
Only after seven years or 7 years, due we see the real deal. 5 five year warranty, really how much better can we get or go. OK, let's recognize another will have a better or higher rated tool(s) , But not a complete system. I promises. Milwaukee killed the competition over 7 years ago when I jumped on board and haven't slowed down since then. It is only because Milwaukee Tools that 12 volt syst...
2" PVC washer drain line repair replacement, including furnco.
Просмотров 210Год назад
We didn't really have to complete a professional job, only a short drain line. This set up works for 1 1/2" pvc lines also. Just remember the larger the pipe the longer holding fitting and pipe together while time is necessary.
iPhone 14 Pro Max, dropped calls / missed calls / calls forwarded to voicemail Fixed! solution.
Просмотров 47Год назад
iPhone 14 Pro Max, dropped calls / missed calls / calls forwarded to voicemail Fixed! solution.
Checking your A/C system not working for beginners. tips hacks and more.
Просмотров 68Год назад
Checking your A/C system not working for beginners. tips hacks and more.
Best Charl Grill Hamburger 80 / 20 Fat Experience For Sure. Watch me heat things up!
Просмотров 91Год назад
Best Charl Grill Hamburger 80 / 20 Fat Experience For Sure. Watch me heat things up!
How to fix or repair your, Magic Chef / RCA 3.0 liter washing machine E3 error code fix.
Просмотров 3,2 тыс.Год назад
How to fix or repair your, Magic Chef / RCA 3.0 liter washing machine E3 error code fix.
How to make a window screen from a store brought kit. The easy way.
Просмотров 41Год назад
How to make a window screen from a store brought kit. The easy way.
Clearing two different location same day. Rigid K-400 AF auto feed. 75' 1/2" refill cable.
Просмотров 326Год назад
Clearing two different location same day. Rigid K-400 AF auto feed. 75' 1/2" refill cable.
Byrna XL 3rd time use, multiple targets Eco kinetic, kinetic and pepper ball. Non-Lethal options.
Просмотров 136Год назад
Byrna XL 3rd time use, multiple targets Eco kinetic, kinetic and pepper ball. Non-Lethal options.
Char Griller $69 heavy duty portable charcoal grill. Best bang for the buck is this barbeque grill.
Просмотров 460Год назад
Char Griller $69 heavy duty portable charcoal grill. Best bang for the buck is this barbeque grill.
Installing a ADA toilet, I will be checking flange, install a wax seal, check angle stop and leaks.
Просмотров 62Год назад
Installing a ADA toilet, I will be checking flange, install a wax seal, check angle stop and leaks.
Changing GE (3) breakers in a sub panel same unit same day went bad. Arch fault to circuit breaker.
Просмотров 58Год назад
Changing GE (3) breakers in a sub panel same unit same day went bad. Arch fault to circuit breaker.
Installing a interior wood door without a template with a kwikset 138 installation kit / tool.
Просмотров 131Год назад
Installing a interior wood door without a template with a kwikset 138 installation kit / tool.
Picking a lock on a vacant unit for practice with my buddy.
Просмотров 87Год назад
Picking a lock on a vacant unit for practice with my buddy.
How to replace hot water tank pressure relief valves the right way. Tools needed and start to finish
Просмотров 55Год назад
How to replace hot water tank pressure relief valves the right way. Tools needed and start to finish
How to find sewer smells leaks in your home or business, with a gas meter. No guessing.
Просмотров 36Год назад
How to find sewer smells leaks in your home or business, with a gas meter. No guessing.
Rigid K-400 AF auto-feed 1/2" x 75' cable. First look and assembly. For 2" too 4" sewer lines.
Просмотров 2,2 тыс.Год назад
Rigid K-400 AF auto-feed 1/2" x 75' cable. First look and assembly. For 2" too 4" sewer lines.

Комментарии

  • @petteri108
    @petteri108 7 дней назад

    Nice review, thanks

  • @Reezo02
    @Reezo02 19 дней назад

    Thank you

  • @JasonLewis42
    @JasonLewis42 22 дня назад

    I’m trying to learn what I can about them and your videos are helpful. I’m 44 years old and a paraplegic. I’m needing my teeth pulled because of infection and a lot of bad teeth I’m really stressed over it and keep putting it off. I was wondering do you sleep with those snap on teeth in?

    • @diy-fixit9566
      @diy-fixit9566 21 день назад

      I would say this mostly depends on wheater one bites there theeth or crunches them while sleepiing? I don't so far and can where there 23 hours plus execpt for cleaning with evverdent taplets. The box is blue with white and minimal pink portion and says Anti-Bacterialr Dental Appliance Cleaner, 126 tablets per box. It's all a learning proccesses and we are all different casesses , Best of luck!

  • @eluckeymusic
    @eluckeymusic Месяц назад

    Mine doesn’t screw back together! Is there something that fell out of the inside?

    • @diy-fixit9566
      @diy-fixit9566 29 дней назад

      I only remember two pieces but as seen in the video quality control could have been better. I have heard of others having similar problems, you might try to return it if you can.

  • @yarlenyogando2011
    @yarlenyogando2011 Месяц назад

    Donde le debo dar para que me bote el agua

  • @doc4pcs
    @doc4pcs Месяц назад

    I had to just say thank you for making these videos. I am 61 and going through the exact same process. I had the surgery a week ago and your videos have helped me tremendously with understanding the process and what to expect.

    • @diy-fixit9566
      @diy-fixit9566 Месяц назад

      Hope to see you are doing well, I'm over 62 and have had some difficulties but doing rather well and overly opptomistic. Best of luck

    • @doc4pcs
      @doc4pcs Месяц назад

      @@diy-fixit9566 Thank you, I am also very optimistic and looking forward to the end results. Currently still having some pain from the surgery when the meds wear off. So hoping that will end soon.

  • @diy-fixit9566
    @diy-fixit9566 Месяц назад

    looks like filter is under $20 on Amazon, excuse me.

  • @diy-fixit9566
    @diy-fixit9566 Месяц назад

    Not even close, best in the busieness. Picking up much more then ever expected. I can't recommend more and much better than expected. If you can get a deal like mine's don't hesitate. Been ussing mine for a few weeks or at least eight times, Wow works much better then expected.Easiy to use, convient and so much more!!

  • @donkeyballs3307
    @donkeyballs3307 Месяц назад

    Get a denture brush & brush your dentures 3-4 times per day ,don't listen to anyone that doesn't brush their teeth ,that's disgusting,like this guy

  • @L3tsFnGoDumDuM
    @L3tsFnGoDumDuM 2 месяца назад

    I’d really like to get this done but i dont know if I’d be able to afford it, thank you so much for the pricing break down

  • @rameshsai3615
    @rameshsai3615 3 месяца назад

    Is it having drier as well

    • @diy-fixit9566
      @diy-fixit9566 2 месяца назад

      this one is only washer dryer sold seperately

  • @EugeneArmstrongSr
    @EugeneArmstrongSr 4 месяца назад

    How much are they

  • @EugeneArmstrongSr
    @EugeneArmstrongSr 4 месяца назад

    How much are they

  • @lizalopez2567
    @lizalopez2567 4 месяца назад

    The guide is useless to me. There is nothing in the front all all. The back has the two water inlets and way down on the bottom is the drain connected to the drain pipe.

  • @lizalopez2567
    @lizalopez2567 4 месяца назад

    I need help locating Midea Clothes Washer Model No. MLV41N1AWW It is a top loader but there is just a drain hose and no plug like you showed. I disconnected the drain hose and water all over the floor but no plug. I am trying to locate the drain pump GE drain pump WH11X34742

    • @diy-fixit9566
      @diy-fixit9566 4 месяца назад

      Your model has an access door to the pump filter in the front of the washer, it should be cleaned. Refer to your Owner's Manual for instructions on Cleaning the Pump Filter. I only copied and pasted this from the internet best of luck

  • @phillipherrera5
    @phillipherrera5 5 месяцев назад

    You look like bleep with that mask on. I wonder if some people feel better or healthier than others. So they put on a face mask. Unbelievable I can't watch. It's not about you personally but "people" with face masks still.

  • @abeblassingame3579
    @abeblassingame3579 5 месяцев назад

    Man your teeth look great .

    • @diy-fixit9566
      @diy-fixit9566 5 месяцев назад

      thanks, I did some research and found some basic looking designs and showed my Dentist of what I like and this is what we came up with so look around do your research and if you find and image of what you like, similar to my uppers Show them and see what you like! How I came closer to my prefered look with Her help!Two last things I choose the brightest color thinking will fade through time and wanted a natural look so this is my final set. Best of luck and due your research, I hope to have some helpful information on my site? Please take a look.

  • @user-fc5rc4cy3x
    @user-fc5rc4cy3x 6 месяцев назад

    I can't change the language lol. It's in Chinese I think

    • @diy-fixit9566
      @diy-fixit9566 6 месяцев назад

      I'm not sure but maybe try to reload windows, should be option for language? Mines came in English.

  • @christiansabia8500
    @christiansabia8500 6 месяцев назад

    Do you need to turn the water off when just replacing the diverter valve?

    • @diy-fixit9566
      @diy-fixit9566 6 месяцев назад

      the water hot and cold are off already and yes you can change the diverter with out shutting off water. Which is the middle stem or otherwise know as a diverter. But to be clear hot and cold stems will need water to be shut down.

  • @mikejohn5958
    @mikejohn5958 6 месяцев назад

    how much is Maintenace so far? did your implant hardware and snap on ring last long?

    • @diy-fixit9566
      @diy-fixit9566 6 месяцев назад

      my titanium implants of 4 millimeters wide and 13 millimeters long will last a life time. But there's always variable's like healing bone density age and so on. So don't rush the process. I'm in to 2.5 years and I'm 62 years old. So I'm feeling progress but feeling a bit more time to on one implant of 10 millimeters needing a bit longer to heal. All of us are different so use your best judgement. And if I didn't write before one tablet of efferdent works lovely at least once a day with hot water.

    • @JasonLewis42
      @JasonLewis42 21 день назад

      @@diy-fixit9566 are you saying that 2.5 years in and it’s not completely healed yet?

    • @diy-fixit9566
      @diy-fixit9566 21 день назад

      @@JasonLewis42 I'm in over 2.5 years in and yes I still difficulties from time to time but manageable. Mostly being lasy cleaning daily. But I wear mine 90+ percent of the time and Have had limited issues

    • @JasonLewis42
      @JasonLewis42 21 день назад

      @@diy-fixit9566 I think I have watched all off your videos on the subject and on one of them I think you said that you mostly just use a rinse each day. Has that not worked out so well? I kinda worried about it myself because my heath is not great and I’m not a great healer myself. Also I have times when I get down and sick for at least a week at a time and can’t take good care of myself during those times so I am worried about it. But I know I need to do something and soon at least get all my teeth pulled I guess. I sure appreciate you talking to me.

    • @diy-fixit9566
      @diy-fixit9566 21 день назад

      @@JasonLewis42 I have been lazy at times and did need to to use more than Efferdent, and some time brush

  • @diy-fixit9566
    @diy-fixit9566 6 месяцев назад

    cutting over 50 keys in a hurry for our 7 laundry rooms. More than adequate machine for normal use, especially using the methods described.

  • @lauramarianella
    @lauramarianella 6 месяцев назад

    I have that one, bought it in 2015. Today 9yo and still working.

    • @diy-fixit9566
      @diy-fixit9566 6 месяцев назад

      Nice I updated later to a 3.0, you would like it

  • @IDOLeyez
    @IDOLeyez 7 месяцев назад

    Where did you get this color (Gray & Red soles) ?! I can’t find those anywhere - only brown/red or black/red

  • @brianlanders8028
    @brianlanders8028 7 месяцев назад

    It looks like the trap is well made, you did a great job with the improvements to, I'm having squirrels problems and every advice I get is helpful in making a trap. I live in town so I can't shoot them, so thanks for the heads up.

    • @diy-fixit9566
      @diy-fixit9566 7 месяцев назад

      There's one that works better Squirrelinator. And they love chocolate, not so much peanut butter as most would think. Best of luck.

    • @brianlanders8028
      @brianlanders8028 7 месяцев назад

      @@diy-fixit9566 : Thank you, I'll need it. 👍👍👍

  • @diy-fixit9566
    @diy-fixit9566 7 месяцев назад

    Could be 1856, ? , Forgot wire strippers and possibly others, but hopefully you get the idea. Totally well respected.

  • @magnum15917
    @magnum15917 7 месяцев назад

    Enjoy the video just pick one up Mostly to use with a cut off wheel and no one has talked about needing to get the adapter, and/or using a 3 inch wheel on, it exactly what I needed to know. Ordered the adapter and cut off wheels off Amazon also 👍

  • @chrisgage9843
    @chrisgage9843 7 месяцев назад

    How much

    • @diy-fixit9566
      @diy-fixit9566 7 месяцев назад

      I have a video with the price breakdown for each extraction, bone grafting and implants plus the snap in dentures. Just under $1700.00 both top and bottom. Other video available on my procedure on my channel should be in my dental playlist, thanks.

  • @gavinbroad1743
    @gavinbroad1743 7 месяцев назад

    Just got mine. Had any trouble with the collet? Finally got a ¼" wire brush into it, but it won't come out, the whole collet & collar comes off together.

    • @diy-fixit9566
      @diy-fixit9566 7 месяцев назад

      if possible use the provided wrenches and see if you can break the inner collet from the outer nut. Also trying to reset the collet and using the wrenches might help. I wish Milwaukee would have had a warning with the tool. But this is a common mistakes others have. Calling Milwaukee might also help best of luck.

    • @gavinbroad1743
      @gavinbroad1743 7 месяцев назад

      TBH, I gave up and returned it. No way is should be that awkward. I called Milwaukee and they agreed, so refund then go for the angled unit. @@diy-fixit9566

  • @truepyro28
    @truepyro28 8 месяцев назад

    I use this, but looking at replacing it. It's too hard to dig out shorter pliers in the deep pockets

  • @annpeace4440
    @annpeace4440 8 месяцев назад

    What I was looking for was not ONLY what it looks like hot but what the activity is when you use it for a cold wire. . BTW your mask does no good with your nose exposed.

  • @danalaniz7314
    @danalaniz7314 8 месяцев назад

    Very clear and concise. Thank you very much !

  • @fracman55
    @fracman55 9 месяцев назад

    How many snaps do you have in your upper arch ,im like you I could not afford the non removable Which are much nicer below the gum line ,how did you clean your upper gum area before you got your snap in dentures ,the dentist told me just too rinse . Until all area is totally healed only brush the suction top not around the implants at all .

    • @diy-fixit9566
      @diy-fixit9566 9 месяцев назад

      I use a rinse they gave me and listerine. 4 implants on top and another 4 four millimeters wide 13mm long titanium. I have a video on my channel which shows my first week of what I went through

    • @fracman55
      @fracman55 9 месяцев назад

      @@diy-fixit9566 thank you one more question how long did you have too wait until you could brush your gums once the sutures fell out ,was it a month ,2 months ,I realize everyone heals slower or faster .your snap on dentures look really nice sir im just a bit older then you I’m 67 .no upper teeth for 15 years . I used got. Denture implants 2 week back ,i could eat steak or anything with no upper teeth,my gums are that strong still without no upper teeth. But I’m done with that I want teeth and more denture adhesive . ,that’ crap is. Slimy and disgusting ,no more

    • @diy-fixit9566
      @diy-fixit9566 9 месяцев назад

      Sorry I don't remember exactly but I use a bamboo brush when I did not every day but most likely two months after.

    • @fracman55
      @fracman55 9 месяцев назад

      @@diy-fixit9566 I use a bamboo brush too I love it , so it will be ok too go 2 months without brushing gum area that’s a long time . I remember when I got my teeth pulled 15 years ago I started brushing the gums once the bleeding stopped and rinsed with salt water . Everyday constantly rinsing . It burns for awhile but stopped burning after while . Heals much quicker with it for me

    • @diy-fixit9566
      @diy-fixit9566 9 месяцев назад

      Salty foods are ok, not sugary foods and risince is best even several times a day, especially after every meal. Best of luck

  • @EditioCastigata
    @EditioCastigata 9 месяцев назад

    Hey, thanks for sharing! This is exactly the comparison and opinion I have been looking for, while considering an upgrade.

  • @gipspips
    @gipspips 9 месяцев назад

    u

  • @jamescannon7267
    @jamescannon7267 9 месяцев назад

    Wearing a face mask improperly is like not wearing a mask for both.

  • @diy-fixit9566
    @diy-fixit9566 9 месяцев назад

    Forgot to mention just last week I found something different, I shut down the switch for 10 seconds and essentially I wound up resetting the control board. But wound up the board is actually bad. Just another step to try.

  • @africaRBG
    @africaRBG 10 месяцев назад

    this was provided with my tools in my HVAC preapprenticeship program. its pretty sweet!

    • @diy-fixit9566
      @diy-fixit9566 10 месяцев назад

      Yes it is, best of luck in your field

  • @VRiley09
    @VRiley09 10 месяцев назад

    Hello, do you know where I can get a replacement lint filter. I have tried looking on Midea website but I do not see if they offer a replacement? or do you know the dimensions. TIA

  • @thalegacy6
    @thalegacy6 10 месяцев назад

    I have the right angled version and use it just about everyday.

  • @iamalandstander
    @iamalandstander 11 месяцев назад

    Is it possible to get the PC to turn the TCL on and off or do you need to always do it manually?

    • @diy-fixit9566
      @diy-fixit9566 11 месяцев назад

      I'm using a LG 34 inch ultra wide and this dose work on my new screen, I'm plugged using HDMI. Not sure about the TCL

  • @bigdaddy4975
    @bigdaddy4975 11 месяцев назад

    That’s not milli amps that’s micro amps for testing the flame sensor

    • @diy-fixit9566
      @diy-fixit9566 11 месяцев назад

      Thanks for the update and info.

  • @diy-fixit9566
    @diy-fixit9566 11 месяцев назад

    Apologize I didn't save the timestamps or as RUclips calls them chapters, but in description for sure, Thanks.

  • @justicejones5025
    @justicejones5025 11 месяцев назад

    Thanks for the video. I'm tasked with purchasing new displays for a business I do consulting with. This TCL is my final pick. Thanks!

  • @huascargenao8298
    @huascargenao8298 11 месяцев назад

    Very bad explanation

  • @prxnceyxng9002
    @prxnceyxng9002 Год назад

    Can I use to test fuse on a car

    • @diy-fixit9566
      @diy-fixit9566 Год назад

      Yes you can use continuity but you might need to pull the fuse out to test it.

  • @radicaldreamer
    @radicaldreamer Год назад

    My coworker had the same issue, and he bought his less than a year ago.

  • @CG-qc1ob
    @CG-qc1ob Год назад

    Nice video! Very informative thank you

  • @sidwalker6902
    @sidwalker6902 Год назад

    Mask, what's the point?

  • @jimyoo123
    @jimyoo123 Год назад

    Your arm and hands are covering what you are pulling out. What is that tool for? No explanation? You should have replaced the bibb seats. I stopped watching. No fun!

  • @diy-fixit9566
    @diy-fixit9566 Год назад

    Mistake, six elements three top and three bottom my mistake excuse me, thanks. A lot of elements for such a small form factor.