Видео

Yes 1002 refers to the nec tokins closer to the rsx so try this procedure it should start right up, if you want something for longer term replace the 2 nec tokins at least. And yes this ps3 still up and running.

​@@zul_fix Thank you so much for the response. Just one more question, I found some 470uf 16v caps on Amazon. Would that work ? I could find the 6.3v caps

@Aman--Wangnao77 should be good the voltage limit does not really matter as long as it is not under 6.3v.

@@zul_fix the ones I found has a high ESR rating. Can I still use them ?

Thank you for watching and glad it helped you!!

Very nostalgic, I remember the xmas when i first opened it.

Sim depois de tirar a purpurina ficou boa.

@@zul_fix opa,obrigado pelo video,o meu estava assim também,abrir ele e limpei a chave de liga e desliga,é agora esta 100% 😀

@@MrRabbitXPahaha que bom que deu para ajudar! Obrigado

Many thanks for watching and subscribing!!

Obrigado eu por ver, também fiz versão PT do mesmo video! Saudações

You are Welcome!!

Thanks for the tip!

Hey You have a link on the description that takes you to the store, search for 470uf tantalum capacitor.

@@zul_fix okay thanks But are these capacitors works with all ps3 models if not can you tell me their name too Thanks

@@HAMOUDASCRAFTS no it only works on the fat models and this slim version that has the nec tokins, the 2000 series if i am not wrong.

@@zul_fix thanks

Hey It either needs a good clean or it has a dieing rsx. In your case adding caps will not help.

@zul_fix I've cleaned it and change thermal paste and still have this problem

@zul_fix I have a ps3 slim too not fat

@@Thatonedude547 What model is it because there are some early revision that still have the same problem as the fat. Did you replace the thermal pads on the ram as well?

@zul_fix it's model 2004A something like that, no I didn't change ram pads

Easier than scrapping everything 😄

I even replaced the fans

Did you replace the thermal pads and the paste?

@@zul_fix no bro I only bought before 9 months ago , customer guy said yours is liquid metal thermal paste and you don't need to apply it for atleast 2 years . My problem in short is cpu cores #5 #7 are producing more heat

@@badrinathgunaseelan317 maybe he has not applied it well and it has dry spots. If you are ok doing that purchase liquid metal and check if the cpu is fully covered by liquid metal. If its not then use the bud that comes with the liquid metal to clean and the seringe to reaply it.

Hello. If you mean the white ones with the little dot on them they are resistors. Unfortunately this video was a while ago so i do not remember the values, im sorry.

Hey, I have linked everything on the description, hope it helps. Thanks

Not that i know of, have you tried the link i have on the description? It comes from china though.

You can replace only analog mechanism, while keeping stock 4pin hall sensor housing. Ofc if problem in hall sensors or magnets - it's over. This mod may require some efford, cuz mounting pole on potentiometer-based analog module not the same as hall-based ds3 pole, it's a bit smaller and doesn't have locking clip, so you need glue it or something. Idk why no one ever tried to mod 3-pin stick and ppl still buying 10-15-years old used analogs, which feel awful

These i bought are old but feel normal to use.

​@@zul_fix they r good, may be more durable than newer models in term of stick construction, having 2 centring springs inside, but after 15 years of use ofc they can't be that smooth as new, even after lubbing. i use few drops of krytox 105g0, move stick a bit to lube spring and bottom part, than 205g1 for upper moving parts

@@LeetPandatruly are at least they will not drift over use. Will see if we have that lub were i live and give it a shot. thanks!

try to do a reinstall on the samsung system, you have tutorials on you tube that show you where you can find all the tools

cherche un tuto dan youtube pour installer le sisteme

Those temps are normal if the pc is running games over 90ºC is worrisome, if you see artifacts your gpu may be starting to fail indeed.

Portuguese.

It was a bit hard to solder it yes. I had no new springs so needed to use the original ones

Hello, probably yes, but i used silicone spray off camera and it stopped doing that and works fine now.

@@zul_fix silicone hel lubricate and reduce friction but once the brushes are gone it will do it again soon. Still good job!

Thank you, eventually needs a new motor this is 40yo now.

Olá, boa dica para um projecto futuro tentarei sem duvida. Obrigado!!

Works on all boards you just need to check the revision to know were to connect it.

Thank you for your compliments!

470uf @ 6.3v

Olá, tem 1mm

@@zul_fix assim vlw Man

Depends, have traced the problem to originate from the nec tokins?

@@zul_fix not sure I mean it has rlod before but only shuts off after playing intensive games After replacing thermal paste it started having ylod :'( I've heard that 65nm chips only have 20% chance of being faulty rsx chip which is much lower than 90nm ones

@@zul_fix now my ps3 shuts off after 5-8 seconds Also should I use 470uf 16v capacitor?

@gnrtx-36969 thats correct. If you have a possibility of checking the syscon it is better since it will tell you exactly what the problem is. If you cant try to add a tantalum capacitor has i have done on the video to see if it works.

@@zul_fix I don't really wanna spend money for appliances for syscon But I did find 470uf 16v tantalum capacitor for cheap though It could be worth a try ig Is it alright if I use 16v instead of 6.3v though?

ahaah yes, bit frustrating did the wrong chip order.

Best of luck, sometimes you just need to reattach the two faces of the controller if they are not springing back to place.

@@zul_fix thank you man, had a couple whiskey drinks and tried it again somehow got it done, everything is working nice now😎 thank you for the content and reply my freind, good day🍻

@@zul_fix patience is key and not forcing peices together, it goes in smoothly when it's positioned right💯

@@miguelbTGOD yes those controllers are tricky to reattach. Thanks for your feedback too.

Just follow the vídeo and the links if you need to buy parts. Any thing let me know.

Yes you are correct the earlier versions do not have the Nec Tokins

Thanks mate!

Obrigado Emanuel. Já tenho esta consola desde que saiu para venda na década de 2000 e já deu alguns problemas mas este não estava nada a espera. Abraço!!

Obrigado pelo comentário mas eu não sou um técnico oficial da vileda. Se o ajudar tenho um vídeo em português e um em inglês.

Hey I am not sure tbh, did not go trough all of them.

Thanks

Hello it is a capacitor but I have no clue on the value of it, the only way to know is to see on a schematic if there is one of this fob.

It is, I believe it is sold on Aliexpress

@@zul_fix OK

Might do a regiveway xD, since i dont use it!

It is alive again so he is doing fine :D

Obrigado pelo teu feedback ajuda-me a continuar o trabalho!

Hello it is easier if you write on your language and i translate, but if you are asking if it can be fixed you need to check the error codes first.

Many thanks bro

Its the graphics processor, solder balls are cracked, it does not connect properly therefore displays those errors.

Hello Lucas Your issue is probably board related if you cant get it into download mode. Have you tried that?

@@zul_fix yes i have and it is stil boot looping.

@@og_levelthreater7777 in that case your issue is probably board related without looking at it with a multimeter it is dificult to say.

@@zul_fix how about mine, it goes to safe mode but for 1 sec and restart continue to boot loop again what could be the problem there?

Well if it was not water damaged have you tried to remove the battery and connect it to the power cord and see what it does?

Esqueci me de mencionar para efetuar uma limpeza na roda do contraste com spray limpa contactos e especial analize nos componentes em redor dos condensadores. Já apanhei pistas, pinos, vias corridos.

Sim também me aconteceu ter traces a perder contacto após a reparação tive de andar a pesquisar com o multímetro. Pensei em substituir o ecrã por um bennvenn mas não sei o que faça já que este apesar de estar a funcionar temos de ver de lado ou por cima para ver alguma coisa.

Thank you very much