Видео

I don't think they changed the rear suspension yet on the rav's, so you should be good. You can always cross refrence part numbers if you have any doubts

@@eltumbleweed05thank you. I already installed mine. when it’s loaded how many psi do you put?

@@user-ik3nw3ck2d I have it at whatever the max is

Probably not. The SE is the "sport" edition and has different suspension components which are geared more towards performance than comfort. Different shocks might help with the ride, maybe some sound deadening material in the back for the loudness?

@@RobertBouffard-z7t awesome! I’m glad it helped. I saw somewhere a switch that had the option to turn the DRL off, might be my next project

Not specifically. It fits all 5th Gen RAVs

It is not easy. Are you spraying with soapy water? the soapier the better

@@eltumbleweed05 Ok, so I couldn't get it into a hot dog shape. Once I put it in the oven for 5 minutes at 160 degrees it became more pliable. I manage to get one in. Once my busted knuckles recover, I'm going for the other one. Yeah, this definitely isn't easy, lol.

19-22 Hatchback

If you look up start stop delete harness, you can find a similar one

kinda, more sound than anything. Still happy with it though

Yeah the light took some getting used to lol. Ill take that over my car turning on and off at every light though. I might see if there is a way to reprogram whatever module controls it to think it doesn't have it

depends on the legislation of your country, i think in most cases device like this won't void the whole warranty on your car...

You would have to turn off notifications on the cluster so it won’t warn you it’s open. And my remote start wouldn’t work

LKQ or eBay. LKQ you gotta make sure to confirm with a pic that it’s the right one

Glad it helped!!

Interesting! Thanks for the heads up

why so? For me it just auto-disables it, and then I can push this button as usual, it just works as expected

a.co/d/4fro9Vu

It’s just a decorative sleeve, not SS

Interesting, mine definitely still works. I haven't seen a fault code for that module either.

So far so good! I am wanting to do a lift, so if I go the Eibach Spring route idk if they will work

@@eltumbleweed05 Good to hear. I'm on the fence between bags or springs. I rarely need the extra lift in the rear, but when I do, I do. Leaning towards bags due to the infrequency I'll need them, but I know I'd never have to worry about progressive springs leaking.

@@kc9fjb I keep them fully inflated all the time. Idk that i would say it "lifts" like springs do, but def makes sag less when loaded down

@@eltumbleweed05 Right, less sag is the goal, not really "lift". My hitch mounted cargo rack sits pretty low since the hitch itself is already below the bumper.

I do! @power.up.garage

I bet there’s another manufacturer that’s making them by now. eBay is a great place to look

I ran them over the heat shield of the muffler

Absolutely!

Remote start! It’s better with an LE because it won’t shut off when you open the door

I don't have an updated link to the exact one I used. They are a lot more options now, you may have to search XA50 RAV4

1/4". I do but haven't used it for the airbags. I pretty much keep them maxed out all the time

@@eltumbleweed05 Thanks bro, appreciate the video and info

@@eltumbleweed05 I installed the Airlift kit on my RAV4 yesterday. They are really squeaky! Do you have the same problem? If so, do you have any tips to resolve it? If not, I have to assume that it’s because I have aftermarket eibach springs on my vehicle.

@@potatogoestocollege I haven’t heard them really. What psi are you running?

@@potatogoestocollegedo they still squeak or did you find a solution?

odd, i just copy and pasted it into google and got results

I did them when I removed the bumper to Raptor Line it. I didn’t do a how to unfortunately

Such a cheap and easy upgrade!

Thanks! So I had them in my garage from a previous project, but they are just flush mounted led cubes I painted. Here is more info on the paint etc www.rav4world.com/threads/color-match-in-a-can-blue-flame.308892/#post-2812192

I can't remember where I bought them, but the part number is 60842

Glad to hear that!

Pull on the metal handle from the side you are removing and it will pop out

@@eltumbleweed05 thanks! Good to hear they just pop/pull out. I thought it might be harder than that & need to be cut off or something.

the EPA doesn't pay them. if they don't meet qualification they the car cant be sold in the US

It doesn’t shorten the starter life. The starter is designed to last 300k starts per Toyota.

You're welcome! So I went with the Victory Rack because I liked how it uses stainless steel hardware and it didn't use plusnuts. I also liked the way it looks more than the Prinsu one and at the time of release it was cheaper than the Prinsu one. I still love it! I have a Apache 9800 case mounted to it all the tiime, and rotate between my snowboard rack, kayak pads, and traction boards.

@@eltumbleweed05 Great info thanks for the reply!!

@@eltumbleweed05 whats wrong with plus nuts?

@@joyridefiends when you set them you are supposed to put silicone between the plusnut and the body. When you assemble the rack and tighten the bolt into the plusnut, it can cause the plusnut to turn and break the silicone seal causing a leak.

@@eltumbleweed05 good point i can see that.. Thank you

Thanks! Hmmm maybe, what size is the ram mount ball?

That sucks! Did you catch it before starting or mid install?

I made it

Nope. I checked both on Techstream (the Toyota OE software) and with aftermarket tools to see if it could be disabled

With the rack, box and bigger tires I get 24mpg

Auto Stop Start Engine Canceller Eliminator

Whats up Kwayne!!!

Where is the evidence of this? Hyrbids, and a whole bunch of other cars have this feature. I think a lot of people have a misconception that the starters in new cars are made the same as the starters from 1970s

@@beexiong2995 Hybrids do not use the starter with auto start stop. The electric motors spin the engine to 1500 rpm which starts the engine

@@beexiong2995 wear on the engine more than a starter

You’ll have to turn off notifications for any alerts on your cluster. Plus I’m planning to add remote start and it won’t work with that sensor disconnected

@@eltumbleweed05 don't know about remote start but you don't have to turn off popups. You just get a message saying it's unavailable every time it would have turned on. Not nearly as annoying as the feature itself. Also the popups I turned off seemed to be specific to start/stop only. Hopefully it's useful for people not interested in remote start and wiring Chinese electronics into their electrical system. Been working great for me so far.

Do you mean the connector to the latch under the actual hood? Not inside the cabin under the wheel, right? If so, do you just pull up on the little tab piece and squeeze the sides and pull it out?

@@dirkwiggler9294 yes the latch in the engine compartment. It's a little hard to remove the connector but when you disconnect it, it no longer works. It thinks the hood is open for service. Surprisingly there's no hood open warning when driving. I kind of expected that. However, after removal there is a message that says that it's unavailable every time it would have engaged. You can either ignore that or you can turn that message off under the popup messages in the settings menu. I would recommend taping the ends of the connectors to make them water tight. Maybe zip tie the dangling end so it doesn't hang down by the fan. Works on my '21 RAV4 XLE Premium. It throws no codes on a code reader. Can't vouch for other models, years or features but it works perfectly so far..

@@dirkwiggler9294 also, if you can get a zip tie around the actual electrical switch to hold it closed, it would be the same as disconnecting the wire. I tried but my fingers are to fat to fish it in there so I gave up.

Thanks!!! Wheels are AVID AV30’s and tires are Falken Wildpeak A/T’s

you would still need to drop it to hold the nut while you tighten the bolts

@@eltumbleweed05 right on! Debating on this or a front runner slimline. I just worry about the leaking and headliner dropping lol

@@-JMF916- if you don’t use plusnuts you shouldn’t have a problem with leaking

Goodluck with that