Видео

Do not use the glue stick. It will stick to your bed and it will ruin your bed if you put too much so you can do it just don’t put too much.

How do I make it heat up?

That cord organiser is a great little idea

Thanks for the info but what about the extrusion temperature and cooling of the pla? You mentioned turning up the build plate temperature and so what effects does the extrusion temperature and cooling fan have on the pla's ability to stick and remain stuck to the build plate

Battery last?

Does the temperature need to be changed every time we print something? Ours looses the adhesive after 12 min of printing.

Dude slow down on the touch screen. I'm trying to figure it out and you just blazed by it!

I’m doing the same thing and it’s turning out really cool. By the way what ever your filament color is that is the color of your 3d print

Thank you,very helpful!!! Just got one

Yeah, I’m not going to make guns and then give them to kids, fake, or not…

thank you

Thank you for this review! I am looking to possibly buy one of these for my daughter. I have a 3d printer and always have little scraps of filament about. I was between these two because they're an affordable intro.

your amazing I've been lost on what to do for hours this just saved me

How do you get the old filament out to change colors?

My kiddo just got this from Santa. What in the world do we do with the adhesive glue that was in the box? Also, I can’t get an activation code to download the Flash Maker app. Any tips?

You should make a video how to download the Creality slicer app

can you use the creality slicer as a website?

Question. My son got this printer for Christmas, do I need a computer for downloading the stuff to print or can I do it from my phone (don’t have a computer😬)

I see you have a Mac. How did you get Cura downloaded to it? I went the the Elegoo site and they want me to disable security settings to install it. That isn't something I am comfortable with. Thanks!!

I have the super version

Thank you for this nice nice comparison review. I got the MYNT3D Super for my kido.

It's not working

I got this on Christmas for my daughter

Great informative video. Got the Pika 3D Pen for Christmas Today. Wanted a new craft to try and one that once I get used to it can do my own thing as well as following templates. Thanks again and look forward to watching your other videos

seriously? you didn't show the machine creating it...smh

No help at all

Can you paint them after?

Best and most useful guide i have seen so far thank you

Great video, just got that very same machine for my 12 years old and your tutorial will be perfect 👌🏻

Love it! What camera did u use to do the time lapse?

does it come with the printer filament?

Thank you so much!!! This was a great video and got me and my son going!!!!! ❤THANK YOU!!!!!

printah

So nice, clear to the point, and she explained the pens very well. 😊

Do you need a microSD card?

Too many ads to start the video….annoying

Loading filament before leveling increases the odds there is a bead of filament at the nozzle tip that will throw off the calibration, does it not?

So how do you get whatever you print off of the bed without touching the bed gloves cause mine will be here tomorrow

Super Helpful I wasted 8hr trying to figure this out.

You need to upgrade your slicer to the orca slicer works so much better and is completely compatible with the 5m.

Thanks for showing how to z offset

1:32 what happens if the orange light doesn't stay lit/on when plugged in?! I just opened it from the box its supposed to be a s@nt@ gift

My first layer doesn’t even stick 😢

ㅤ ㅤ ㅤ ㅤ ㅤ

being a complete and total 3D printing newb, I bought one based on this and other videos and facebook posts, ect.... the printer works an absolute treat....took me about an hour from box open to printing....HINT, cut the end of the filament at an angle.... the software installs were another story...FlashMaker won't run on my Ipad mini but will run on an old ASUS 7" that WON'T connect via wifi to the printer....the FlashPrint install hung up on my Dell Win10 laptop...a quick google search told me to open task manager and end the installation, which resulted in the install quickly finishing and it works fine... the task manager work around was made easier when i found some sort of simple list of running stuff that only had 2 things on it and one obviously wasn't the installer and the other probably was....right click that one to get an option list, click end and it will take care of business... Flashprint found the printer with ease... imhad already goenloaded an STL that i wanted to print and had the printer turned on....found the STLin the FlashPrint load file window thing and there it was in FlashPrint....clicked Slice and that did it's thing....clicked send to printer....the printer screen started doing things....then the printer started moving and it made the thing....

I’m waiting for my filament but I’m super excited! Great video learned a lot

This is the video I came back to a few times. Thanks again!

lots of tongue twisters in there. appreciate the effort and the info.

The description of how to use the Mynt3d super is inaccurate. If you press the button once, you will have to hold it for the filament to come out the whole time. If you double click that button it will continuously flow.

Thanks. This was helpful to me.