Видео

Sono stato il 104tresimo a mettere il like 😀

I realize this is an old video and you’ve probably already found the solution to your decal issues. But, in the chance that you haven’t - first, Tamiya decals are good decals but they do tend to be thick. As you found, they need help snuggling down. So here’s my solution: 1.) use a setting solution such as Mr Mark Setter and wet the area where you will place the decal; 2.) Soak the decal in HOT (not warm) water to soften it; 3.) place the decal and start to work the water/setting solution out from beneath the decal as much as possible - if you used HOT water be careful, the decal will be soft and easily torn; 4.) Coat the decal with a decal solvent such as Mr. Mark Softer - be extremely careful now - the decal is very soft; and 5.) Here’s the key - use a hair dryer or heat gun to gently heat the decal - the combination of decal solvent and heat will cause the decal to conform to even complex curves - at this point you want to avoid touching the decal at all - if you must touch the decal use a soaking wet cotton bud (Q-Tip) and be very gentle.

Good job! You had me nervous with some aggressive weathering techniques, but your result was very nice.

Very good job, I bought this kit on Amazon, and this video has been very illustrative for when I am going to assemble it.

Great work! This video inspired me to build and paint my Tiger 1, yours looks amazing!

Your a gr8 model builder, what a gr8 phantom f4, keep up the good work 👏👏

Awesome!!.. That's not windshield. that's a canopy...^

Amazing, friend! Congratulations!!

What a wonderful video. Thank you for showing us your skill.

Nice

а что деталь для пушки не использовал . которая типа в инструкции для двигателя ?

what decals did u bought can u pls give link for them

Good job 👍🏻

Weathering was phenomenal! For most modern naval jets like f-14 f-18 that would be too much but because of all of the smoke and pollution from diesel carriers wich these where pretty much only stationed on they got alot dirtier than hers on nuclear powered carriers. So it really gives you that dirty grimy oily feel that I’d imagine that F-4s would have.

Bellissimo! Dove ha trovato la 126ck in scala 1/48?

Работа уровня ребёнка

Not to say this was bad but it could be a bit better if you painted the ground before you placed the palms in

some nice buulding and nice video. can't understand why more people haven't subbed to your channel

Really nice job , but isn’t the weathering on the flaps a bit too much?

Great Job!! learnt some things from you I will incorporate into my next project, keep em coming!

Красиво, правда цвета своеобразные )

very impressive work

Good ide

Looks incredible. Can the wings be swept back and forth once put in place?

Nice build 👍... we used to get RAAF F/A18 visits from RAAF... thanks from NZ 👍🇳🇿

Amazing job thanks for posting

👌👍

Very nicely done 👍

Nice. I had those little sensors on the vertical stabilizers break off, so I replaced them with copper rods. I'm currently working on this kit on my own channel over the past year or so. I'm nearly done with it.

What 's that flexible material wich you masked to paint the camouflage? In what language are the instructions?

Can you please guide me which wash colour should I use for: (a) Fighter aircrafts' panel lines (b) Under carriage (c) WW2 aircrafts (British Spitfires) (d) F-16 (grey scheme) (e) C-130 (Grey scheme) (f) Jet engines Grateful if you can please guide...

Awesome!

Blades don't bend, they break.

I guess that's one way of building and painting a model tank. You've put some decent effort into your model however I would always recommend applying some primer before the application of the base colour. I used to paint the parts on the sprue when I first started this hobby many years ago but read an article by the late great Shep Paine in a Military Modelling magazine and I went from there as part of the never ending learning curve of this hobby. I built the Tamiya Tiger 1 'initial production' in 2019 but used a metal barrel from Aber and some photo-etch parts plus some of my own added additions such as the light cables etc . A lot of modellers make the mistake of painting the barrel muzzle in black instead of the same colour as the barrel and this Tiger 1 you have done i.e. turret no.813 belonged to the schwere Panzer Abt. 501 and the gun barrels were painted in the 'tropen' colour(s). I wouldn't have used aluminium or 'burnt iron' as this is totally innaccurate. Some panzers still left their main guns painted in the dark grey but records show that none of the Afrika Tigers had this. You have mastered the basics of building a model tank so may I recommend you watch videos by M.Kovac -'Nightshift' so you can make your builds even better.

JV, sorry dude, but you need to watch the videos by Martin Kovac aka Night Shift, if you really want to build military vehicles!!

Good! I am building the hasegawa 1/48. I love the Phantom..but the canopy is very boring to masks! Hasegawa is a good kit, but the kit is a common (also old) kit with many different versions..i have the "J" but the main sprue of the fuselage have details of the usaf versions and it is easy to make disaster trying to fix them. Do you like the Academy kit? Trouble? It is a good kit for the price? I would buy the Sundowners version.

Awesome diorama, mate!

Excellent work JV, the end result looks fantastic!

Вы хороший профессионал, но окраска у СУ-34 не получилась😢, стоит купить новый и покрасить красками от специальных наборов нужными цветами и тогда самолёт будет великолепен!!!

Does the figure come with the kit?

Imagine bringing this for a school project

This is the first time I’ve seen this built up. Fantastic build. New subscriber. Welcome to the community and good luck with the channel. Keep posting up, somebody is always watching.

Awesome 👍

these are not a B tomcat exaust - this is TF-30 A

Awesome diorama . Well done . Keep few things in mind for my future projects . Thanks

Wow, intresting camo, and great job

menuda mierda

Awesome looking

👍

Хорошая работа 🙂 good job