- Видео 24
- Просмотров 93 308
ReadlineReady
Добавлен 4 апр 2023
Snap On FlankJaw/Talon Grip Pliers | Full Review (2024)
This is my full review of the Snap On FlankJaw/Talon Grip pliers which are a 3 in one pair of pliers consisting of their Flank Jaw technology with jaws that corner load fasteners instead of on the heads and wont damage bolts if they slip. Their main purpose is turning bolts on low torque applications. They also have Snap On's Talon Grip technology which is a diamond shape cut grip has unrivaled gripping power, more famously known in their needle nose talon grip pliers or Snap On TikTok pliers where people were using them to pinch the edges of pennies, nickles and some other coins and pick them up. They also have a hard shear cutter built in as they fall under the lineman's pliers category...
Просмотров: 300
Видео
Snap On High Leverage Pliers Review HL138ACP (2024)
Просмотров 9262 месяца назад
This is my quick review on the Snap On High Leverage Pliers HL138ACP for red, HL138ACPG for green and HL138ACPO for orange. Advertised as being able to multiply hand force by up to 75%, the snap on high leverage pliers have been around for a while now. But have seen a new surge in popularity thanks to platforms like tik tok. Though not being the famous Snap On Tik Tok pliers (Those being the Sn...
Whats In My Tool Tray? | Heavy Equipment Mechanic Tools | Mid 2024
Просмотров 2,4 тыс.3 месяца назад
My 2nd tool tray tour of 2024. In this tool tray tour I will show you all the sockets, drivers, bits, wrenches, electric tools, pliers, impact sockets and chrome sockets, ratchets and other stuff I have in my quick tool tray. This set up consists of all the tools I mostly use for day to day work and is of course, subject to change as I explore new machines and find new tools that get the job do...
Kobalt Electrical Tester DT-9011 Review (2024)
Просмотров 1,2 тыс.5 месяцев назад
This is my review of the Kobalt Electrical Tester DT-9011. This is a cheap quick electrical tester used for checking things like fuses and outlets but with some preset voltages already included. This tester is found at Lowes for $16.98 but can usually be found on sale for much less. Instead of a traditional light tester, this has preset voltages marked ranging from 6V to 240V and works with DC ...
Lexivon 1/2 Inch Drive Torque Wrench Review (2024)
Просмотров 1,6 тыс.7 месяцев назад
In this video I review the Lexivon 1/2 Drive Torque Wrench which can be found on Amazon for a very decent price. This is a 1/2 inch drive click type torque wrench and being a budget torque wrench has people wondering is it any good? This is the 10-150ft/lb 1/2 inch drive torque wrench which is suitable for medium application and is well reviewed on Amazon at 4.6/5 stars. It also comes in a 25-2...
What's In My Tool Tray? | Mechanics Tool Tray | 2024
Просмотров 3,4 тыс.8 месяцев назад
My 2nd tool tray tour and my 1st of 2024. Starting off with my new Mac Tools Tool Tote which is a considerable upgrade from my old tool tray. In this tool tray tour I will show you all the sockets, hex bits, torx bits, impact sockets and chrome sockets, ratchets and other stuff I have in my quick tool tray. I use this set up for quick fixes out in the yard of our facility when a machine is call...
MAC Tools 4lb ANTIVIBE Sledgehammer Review | My New Favorite Hammer?
Просмотров 7169 месяцев назад
This is my review of the Mac tools 4lb antivibe sledgehammer. I got this off my MAC dealer on sale when it appeared on Mac Flyer 1 for 2024. It was $40 off from the original price. This 4lb sledge hammer has the Stanley Antivibe technology which dampens vibration feedback using a tuning fork, shock dampeners and torque stabilizing bars. This hammer has easily become my favorite sledgehammer at ...
WERA Zyklop Mini 1 Review | Mini 1/4 Ratchet And Bit Driver
Просмотров 3,3 тыс.11 месяцев назад
This is my full review of the Wera Zyklop Mini 1, micro bit driver / micro 1/4 inch ratchet. This thing immediately caught my eye for its size and design and I wasn't wrong in thinking it'd be useful. Its size and fine tooth mechanism have been helping me immensely in getting to hard to reach area's. Its easily becoming my favorite mini ratchet and bit ratchet. Its also not too expensive on its...
SWANLAKE 32 Piece Hex Bit Socket Set Review | Budget Master Hex Bit Socket Set
Просмотров 773Год назад
In this video I review the Swanlake 32 Piece Hex Bit Socket Set which is a budget master hex socket set. Its available on Amazon for a mere $29 and has all the hex sockets you will generally need. These are chrome sockets so they are not impact rated and being a budget hex socket set you should not expect too much from them. However, as per the time I have spent using them, they have been just ...
Crescent Locking Adjustable Wrench Review (2023)
Просмотров 2,9 тыс.Год назад
In this video I review the strange but surprisingly useful Crescent Locking Adjustable wrench or Crescent locking adjustable dual material wrench as its known on Amazon. Adjustable wrenches are great for their versatility, locking pliers are an industry standard, so what happens when you combine them? This thing is definitely a weird tool for a heavy equipment mechanic to have, and anyone in ge...
Duratech Universal Wrench Set | Closed End Adjustable Wrench Set Review (2023)
Просмотров 2,7 тыс.Год назад
Another strange tool review, and today's is definitely weird! This is the Duratech Universal Wrench review. These are close end adjustable wrenches which are quite unusual. Adjustable wrenches are great, and box ended wrenches are the right tools for the job. These Duratech Wrenches are definitely in between the two. They are not as good as a box end but definitely better than an open end adjus...
Crescent 1/2" Flex Head Ratchet Review (2023) | My New Favorite Ratchet
Просмотров 1,2 тыс.Год назад
In this video I review my new favorite Flex Head Ratchet, the Crescent 1/2" flex head ratchet. This is a sub $50 ratchet and is definitely one of the best budget flex head ratchets on the market. The ratcheting mechanism feels smooth and heavy and so does the flex head mechanism. The Ratchet is build of a strong chrome vanadium and has a hefty feel to it. For just $32 this ratchet will definite...
Crescent Adjustable, Ratcheting, Flex Head Wrench Review (2023) | Is It Any Good?
Просмотров 2,2 тыс.Год назад
In this video I review the strange but surprisingly useful Crescent Adjustable, Ratcheting Flex Head wrench. Adjustable wrenches are great, ratcheting wrenches are good and flex head wrenches save a lot of time, but what if you put em all together? This thing is definitely a weird tool for a heavy equipment mechanic to have, and anyone in general as it looks like something that is just a novelt...
Hurricane 3/8 Drive Impact Hex Bit Set | Review (2023)
Просмотров 168Год назад
Hurricane 3/8 Drive Impact Hex Bit Set | Review (2023)
What's In My Tool Tray? | Mechanics Tool Tray
Просмотров 2 тыс.Год назад
What's In My Tool Tray? | Mechanics Tool Tray
Kobalt 20 Piece Ratcheting Wrench Set Review (2023)
Просмотров 4,4 тыс.Год назад
Kobalt 20 Piece Ratcheting Wrench Set Review (2023)
Pittsburgh 8 Piece Gas Compression Test Kit Review (2023)
Просмотров 2,5 тыс.Год назад
Pittsburgh 8 Piece Gas Compression Test Kit Review (2023)
Pittsburgh 10 Piece T-Handle Hex Key Set Review | Best Budget Hex Key Set Under $10?
Просмотров 804Год назад
Pittsburgh 10 Piece T-Handle Hex Key Set Review | Best Budget Hex Key Set Under $10?
Hyper Tough 37 Piece Ratcheting Screwdriver Set Review (2023)
Просмотров 6 тыс.Год назад
Hyper Tough 37 Piece Ratcheting Screwdriver Set Review (2023)
$70 Snap-on VS $7 No Brand Wire Stripper/Crimper/Cutter (2023)
Просмотров 330Год назад
$70 Snap-on VS $7 No Brand Wire Stripper/Crimper/Cutter (2023)
Kobalt 257 Piece Mechanic's Tool Set Review (2023)
Просмотров 18 тыс.Год назад
Kobalt 257 Piece Mechanic's Tool Set Review (2023)
Why You Shouldn't Use Auto Start-Stop On Your Car
Просмотров 31 тыс.Год назад
Why You Shouldn't Use Auto Start-Stop On Your Car
I would love a lot of these but the problem is snap on has a patent on 3 position needle nose pliers and I ain't willing to drop $60 on a specialty pair of pliers. Why were they given a patent for something as simple as a 3 position plier? I have no clue and it seems excessively stupid on the patent offices part.
The difference is that, though Channellock designed the slip joint 3 positioned plier initially. Snap ons design for the needle nose is actually their own. The design of snap ons as opposed to standard 3 position needle nose pliers is that on the 3rd position the jaws become horizontal to each other instead of slanting towards the tip. This helps a lot with holding onto things in certain cases.
47acf
I bought the Snap-on HJ47ACF (8" pliers) and they are very good. I also have two snap-on locking flex head 3/8" ratchets (soft handle) and the CTR861AK2 (cordless 3/8" ratchet kit), PL400B (pliers set), 48oz dead blow hammer and 32oz ball peen hammer. All these snap-on (in my opinion) are top tier tools.
How are they holding up? Can’t decide between these and the Quinn brand at Harbor Freight. Leaning towards Quinn because they don’t skip sizes.
They still work just fine to this day, I don't own any Quinn stuff but i've heard they are good!
@@ReadlineReadythank you sir!
I love these things. They work good on rounded off bolts too.
Do you have the part number for the tool tray?
MBT10B-BK
Unsure why there are low reviews. I'll find out over time if they are good or bad sooner or later.
They are still going strong..Maybe the bad reviews are from older versions of the same product
I have a pair. I Like them. I have no regrets . Mostly use them for Home maintenance.
I wonder if they'd ever combine the high leverage tech with the needle nose style, that'd be great
Coat your snap on pliers in penetrol, it will stop them from rusting and getting that dark grey rust scaring
That unit has a valve at the cill side..that's the one I have now...the other one is junk..it doesn't have a valve..ie the compression leaves befor it hits the Guage...
What a waste of video. We needed you to demonstrate how to use the tool.
What do you guys think of this pair of pliers? , do you own them? Let me know down below!
I had no idea Mac had those metal trays until a couple days ago, apparently they are on back order but im gonna start bugging my Mac guy about them.
These things are always on back order, their price is unbeatable value. They are better built and cheaper than the Snap On ones too
Took 4 days to get one in.
My favorite pliers are my Knipex Cobras. SnapOn has made some very successful and unique pliers with the 3 you’ve shown.
Definitely unique, they are special application and pricy but man when you need em, u need em
Started in aviation, 808cf & 61cf
Those 808 VectorEdge cutters are nice, I wanna get one too
The third 3 is my fav
They are the most all rounded ofc..pliers, bolt turners and cutters.
What are your go to pliers? Let me know down below!
Had
Joke pliers.
I think the origional hammer was released under the Proto name. Still Stanley Black & Decker as you mentioned. I've got the Proto 3 lb, and it's awesome👌
Unfortunately when the pliers are on the ×4 position the handles are further appart. When they're further appart the rubber band applies more force due to it being stretched further and squeezing harder. Not sure how to accurately test those but that way can be a little deceiving I think. Good video to show the capabilities though, and I definitely think they grip much better! Im just being another annoying internet keyboard commando lol
...Oh and I forgot to say, Yes! They're worth it! Lol. More comments, more better, cuz RUclips and cuz good video👍
Hey! yeah the test isn't very accurate but I urge everyone to try em on the Snap-On truck before buying em. They really work well. I honestly wish they combo this high leverage tech with the Flank Jaw pliers as those things could do with more force on the jaws
@ReadlineReady Yeah, that would be handy! I usually use my Knipex Pliers Wrench when I wanna hold a nut or bolt without marring it, and I don't feel like grabbing the proper sized wrench. If you haven't tried the Pliers wrench, they're game changers. I carry the little 6" in my pocket. It applies much more force as well, and goes from 0 to over an inch. Nice for AN aluminum fittings and bending flat things too. I'll probly still grab a set of those Pliers though! Thanks
I have actually heard good things about those pliers, hoping to get one soon. I have the Duratech universal wrench which I carry around all the time, it can be used as a hammer too. But it's limited to what sizes you can fit. Its a closed adjustable so it does not slip at all though
Do you own these pliers? Are they a gimmick or do they actually work for you? Let me know down below!
Gosh, get to the point and stop repeating yourself.
How much the price
Which one?
You can afford all the high end tools as a heavy equipment mechanic. Others are not as lucky
Whats the point of ur comment?
@@Fabian7024 dude if you can't figure it out then educate yourself. Not all mechanics make what you do and have to settle for stuff on a budget not everyone can run to snap on everytime they need something
I don't make any higher than most Mechanics. I have an average salary but live in a terribly expensive city to live in. Here's how I save. I don't have doordash, I don't have uber eats, I don't have a car payment, got my car from a salvage auction. Don't eat out everyday, I don't have netflix or any other tv plan, don't have a impulse buying addiction other than the occasional cheap purchase, I buy clothes from discount shops. I am also single and stay away from relationships. You get the point. I don't blow my money on useless things so yeah, I can buy the occasional Snap On tool. But remember, I still have a majority of Amazon brands. I won't overpay for anything I can get cheaper. You can save money, it just takes sacrifice.
@@FedUpCanuck bro hes not bragging 😂 get off your phone and go outside for a lil bit.
What's in your tool tray?
My truck has it but i dont use it. The water pump will still run and stuff while engine is off to balance cooling. If oil temp is higher after a good tow up a mountain it wont shut off when it stops. Or if ac is on. Transmission pumps and coolant still run when engine is off.
You're at 57, meatball.
2 minutes in and you haven't demonstrated it. Terrible review.
Thanks for the review. Have you experienced any damage to the fastener hex surfaces?
Not at all, if adjusted properly it should not round a bolt. It will only slip if the bolt is already badly rounded
Good review, you talked me into buying one! 👍
Hope you enjoy it!
Excellent review! Thank you!
Glad it was helpful!
I have the 3/8" version and am happy with it.
Aaaaaaaand he never uses the tool!!! Video fail.
What are the dimensions of this tool tray? thanks
did you notice the sticker is on the opposite when shown on the box? mine is like that too
What do you guys think of this electrical tester? do you own one or one similar? Lemme know down below!
This was a great video. I really enjoyed this. Your cart is set up very nice. Do you have wrenches or screwdrivers that you carry in the cart also? Or you just don’t need them for the jobs that you do? Just curious. Thanks! SUBBED YOUR CHANNEL!!! Great content on here! ARCO MN OUTLAW CUSTOMS (Outlaw edge RUclips channel )
Thanks! Yes actually, I did update this tray as it's clearly too small. I did a follow up video on it with a new MAC tote tray. That was also further updated and i'll do a video on that soon.
If you ever drive in Boston do not drive below the speed limit or you’ll get killed.
I've been using the same one for a few years with zero issues. I have no idea how well it was calibrated at the factory or how well the calibration has held up. I always set it back down to 10 ft-lbs when I'm done with it. I also have an electronic digital torque adapter. The little brick that attaches between a driver head and socket. But I haven't used it in a while, basically forgot that I had it. I'll check the calibration of the two against each other next time I use 'em. 👍🏾
Not the best stuff, but if it gets the job done for you. Nice share.
I came here to watch this wrench operate the ratcheting mechanism on a bolt. Sadly that did not happen.
Yeah most of them dont
What do you guys think of this budget torque wrench? Do you own one? Let me know down below!
You have a great selection of tools in your tray. Looking at the tray, it didn’t look like you had too much, but you selected a an excellent selection to have in your tray. Simple yet very thorough.
Thank you! Since this video, Ive added a Milwaukee M12 ratchet to it as well. I never really used it much before but I recently figured out how much quicker I can get things done so it was a no brainer! The deep sockets also got replaced by a Capri tools deep impact socket set.
It’s available today, but the handle looks different. What is part number of your Mac tray?
This is fake news. Cars with stop/start are designed with this in mind. Common sense is not common and this guy is proof of that fact.
Wow so lucky..I’ve been trying to get that tote forever…so annoying. Congrats!
Mine took ages to come in too! They are backordered badly.
less talking hands & poor wrenching bolts
How do you put the sockets on ??!?!
theres an adapter at the top of the box, its the one kinda sitting by itself
What's in your tool tray? Let me know down below!
I don’t think I’m doing something wrong I may be but mine is totally not accurate.
Take it back and switch it for another of the exact same type. If you get the same readings, you’re most likely doing something wrong. If you get higher readings, the first one was defective.