Видео

@@goodcitizen64 You're welcome! Thanks for watching!

@@tomguyse3618, Thank you! We were in the area for about 10 days and fished 3 of those days. Good luck on your fishing. 5 weeks is nice! Tight Lines!

@@markwhite4656 , Thank you Sir! It's good to be back on the water!

@@LLDWITHJ , Thank you! 🙂🎣⛄

@@goodcitizen64 You are welcome!

@@joebaughman6457 Thank you Sir! It's good to back on the water 🙂🎣⛄

@@derekholland2818 , Thank you Sir! 🙂🎣⛄

@@1MooreCastOutdoors Thank you Sir! 🙂🎣⛄

@@kevinmedeiros9281, Yes, I'm very happy with the net. Treble hooks can get into the net, but the rubberized coating makes it easy to get the hook out. Frabill Floating Wade Net 19"x... www.amazon.com/dp/B08KC114SF?ref=ppx_pop_mob_ap_share

Thank you!!​@@fishingwithpastormurray

@@markwhite4656 , Thank you for asking. I'm hoping to release one or two videos soon of fishing for Redfish and Flounder in Murrell's Inlet. Cleanup from Helene around our home took me off the water for a while. Thanks for watching!

@@dennishoward2072 Thanks for asking www.homedepot.com/p/True-Blue-24-x-36-x-1-Budget-FRP-2-Washable-Filter-HD0124361/202195941

@@gilbertogonzalez9494 Welding Oxygen Tank filled with 99.2% Pure Oxygen at 2000 PSI

I currently exchange the oxygen bottles at a welding supply shop.

The Bubbler Pump is pumping compressed air to operate the air lift pump water circulator. I'm supplementing the system with 99.2% pure oxygen through a separate line into the Nano Air Stone.

Sorry brother I seen the hoop wrapped cylinder that you have in the back the seat there and it looks like one that we made as I am a cylinder manufacturer and know that an oxygen cylinder must be green and be tagged with a flammable sticker. But the one in your video is an old air bottle. It’s probably out dated meaning over 15 years old. And it’s a Luxfer?

@@gilbertogonzalez9494 No problem. Here is the link to the oxygen tank as listed in the Description: gascylindersource.com/shop/oxygen-cylinders/20-cu-ft-steel-oxygen-cylinder

@@goodcitizen64 , Thank you for joining us! 👍🙂🎣⛄

Thank you! Thanks for watching!

Keith, Thank You! It's nice when you get the "save." The Kayak has its challenges for sure and some advantages. I chased him in some 20" water and circled back through it to get him loose at the end of that point.

​@@ben2fish Ben, you're welcome! Thank you so much for joining us! 🙂🎣⛄

Awesome! Glad you enjoyed it! Thanks for watching! Tight Lines!

@@bradleydodrill4820 , Thank you! It gets your blood pumping for sure.

@@DaveCox-ri4ni Dave, Thank you Sir! 🙂🎣⛄

@@boater18281 Dan, Thank you for your kind comment and encouragement. Attached to my leg is a kill switch that also tethers me to the kayak. When I added an electric motor to my setup I felt like it was essential to add it. Thanks for watching! Tight Lines!

@@Fishing-Kayak Thank you for the comments and for watching! I was pleased with the boards. They are game changers when fishing for Stripers. Tight Lines!

@@charlesraiford9061 , You are welcome! Thanks for watching!

@@keithbradley612 , Keith, Thank you Sir! It was awesome to see and hear it that close. I'm glad the camera was facing that side and got the action.

@@keithbradley612 , Keith, Thank you Sir! Thanks for watching!

@@xarrow81 , Thank you!

@@DaveCox-ri4ni , Thank You Brother!

Found your channel yesterday & watched several more of your trips. I’m 77 years old and have done some Rocket Shad catches in Tn & Ky years ago. You got me fired up. It’s time to dig out the tackle. Tried two yaks about 12 years ago on my toad behind my MH. Gave up on them pretty quick. Lately been now studying pontoon air yaks for their Light weight for RV. Awesome channel! Be safe. Are you catching your own bait?

@@boater18281 , Awesome! Thank you so much for your comments and for watching! I purchase my bait from Chris's Bait Shop in Anderson, SC. It's pretty tough to throw a cast net from a kayak. I fish one day a week, so I want to make every minute count toward chasing Stripers. I trailer my kayak when fishing locally and cartop it on my toad behind the RV when traveling. I use a hitch mounted deer hoist from Amazon to get my Kayak on the roof of my Wrangler Unlimited. Next time I load it up I'll try to make a video of the setup.

👍🎣

@@jackbecker2946 , Thank you Sir! I appreciate your encouragement!

@@calloftheoutdoors8941 Thank you!

@@darlenedeyoung6496 Thank you! 🙂🎣⛄

@@mtnguyen1696 , Thank you. I no longer get my oxygen tank refilled. It became too much of a hassle to find suppliers to refill the tank. I now exchange my 20 cubic foot empty tank for a full tank. The steel tanks are about 10 pounds heavier than the aluminum. I do this at welding supply shops. Currently, I exchange my empty tank at Gas and Supply for under $10. The shop exchanged my aluminum tank for a steel tank. Let me know if this helps you.

@@fishingwithpastormurray I may just get another battery operated pump for the air stone. Any downside to that và real oxygen?

@@mtnguyen1696 , It's tough to keep Blueback Herring and Trout alive in a 30 quart bait tank, especially during hot weather. Oxygen along with ice bags work well for me. But, I've also had some luck using the nano air stone along with the airlift pump and Ziploc bags filled with frozen water. Also, the oxygen helps keep the bait very active.

@@mtnguyen1696, Thank you! I have the advantage of fishing early in the week when there is minimal boat traffic.

@@letun3481 , Thank You!

@@keithbradley612 , Awesome! Thank you Brother!

@@DaveCox-ri4ni , Amen! Thank you Brother!

@@charlesraiford9061 , Thank you Sir! I'm in SC, but I fish out from both the SC and GA sides. Three places that I know of to purchase Trout. Year round is the Lake Hartwell Outdoor Center. Seasonal is the BaitHouse in Hartwell and Chris's Bait in Anderson SC

Thank you so much for the concern. I chose these boots because they are loose and come off easy. It was my concern as well, so I purchased oversized boots to wear in cold or cooler weather. Tightlines my Friend!

Awesome! Thank you for watching. Here is a link to the RUclips Video on how I setup my trolling motor in case you haven't viewed it. ruclips.net/video/1qyjzW9zexc/видео.htmlsi=mzA2VNeul_Z9htma

Chris, Thank you! Yes, Chris's Bait Store is in Anderson SC

Dave, Thank you! It was fun 🙂🎣⛄

Bradley, Thank you! Good day on the water! Lots of fun! 🙂🎣⛄

Bradley, Awesome! Thank you so much. Since the video was published, I've shortened the shute to about 4”. Also, I remove the shute leaving the filter attached to the shute to rinse out the scales in the lake water. The shute slides on and off a lot easier than the filter.

Thank you so much! 🙂🎣⛄

Yes Sir! Thank you Brother!

Hi Jim, Thank you so much for watching and for your kind words. The vocals are actually my wife singing. I thought "Deeper In the Hole" would make a good theme song for my Channel. To answer your questions: Concerning small weights to take the bait deeper. I don't use lead weights, but sometimes I use up to three red glass beads ranging in size from 1/4" to 3/8" diameter. I prefer to used faceted glass beads from Hobby Lobby. The beads serve multiple purposes: first, as a line stop against the planer board pigtail swivel. Second, two or three glass beads will rattle against each other as the bait swims (especially for Herring). Third, they add some weight. As a rule of thumb, I set the length of line behind the planer board equals the water depth that I am fishing. Also, the bait should be above the Stripers line of sight. Concerning the Clicker: I'll try to get in a habit to set it to the off position after a fish is on. There's a lot going on when a Striper is on. I'm hard of hearing, so the Clicker is important, especially when I have two rods behind me. Distance between a complete Zig and Zag cycle is approximately 70 yards. But it varies based on speed and conditions. If I'm going against current, I may not be covering much distance at all. Also, I vary speed, distance and depth (height of the wave) of the ZigZag. Also, pausing for a minute or so is a good technique. I've had lots of striper runs when I'm baiting a hook and the other three lines are not moving. So, the pause is an effective technique. Thanks for the questions! Good Luck! God Bless You and Yours! Pastor Murray

Thank you Keith!

Thank you!🙂🎣⛄

Thank you! No, I power my graph with a separate 18amphour AMG battery that I had before adding the trolling motor. It works well. I would go with an 18amphour LiFePo battery for the weight factor. This is a link to what I recommend. NERMAK 12V 18Ah Lithium LiFePO4 Deep Cycle Battery, 2000+ Cycles Lithium Iron Phosphate Rechargeable Battery for Solar Power, UPS, Lighting, Marine, Scooters, Fish Finder and More, Built-in 20A BMS a.co/d/5xqQKBy

Thank you!

@@jldj5000 You are welcome!