Видео

Hi there! That is built by me. It has basic KJW / ASG frame but everything else is from CLPD and sight is Shield RMSx

Airsoft 6mm

Thanks!!

Thanks!

Aina ❤️

Nope! Stock one with cerakote slapped on top :)

There is no PF on Action Air. Scoring is done by minor though.

We use stop plates in Finland. The timer they were using were these: timer.shooters.global/?srsltid=AfmBOopcQErdo6ngSgsTLccUEBSj5H1K1DeZclEqV3yDVWZBLAW5y1hC . I would want to have one too :) @shootersglobal

Thank you! Travelling with airsoft gun depends so much of the country. Rule of thumb is that treat them as real firearm and you won't have any problems anywhere. In Finland airsoft is considered toys where in Netherlands they are to be treated as they would be real guns (even with the paperwork and such). I had no problems with the travelling when the paperwork was in order. When flying back it took awhile to get a police officer to check the gun and my face :)

@@jesseniocompetitiveshooter Thanks for the reply, good info. :)

Currently 4 but testing the 8 moa atm

The glass one! Shield does not make them anymore with poly lens. That poly lens was the sights weakest point. I’ve have had my glass one for some time and there is at least 20-30k shots done and keeps going. I heavily recommend! @ShieldSights

@@jesseniocompetitiveshooter oh that’s awesome! Do you know if they still make the custom color versions with glass lenses as well?

Im pretty sure they do! I just prefer black ones on mine but I’ve seen red and purple ones with glass :)

Thanks! There are few C’s but to my excuse I have not shot or trained in 4 weeks. Gonna try this training stage again on weekend :)

Lol! I thought you were trolling with the Apollo 11 but that is a proper 2011, sweet looking pistol! I love the Shield RMSx a lot due it's wide window. In IPSC/IDPA etc.. you tend to move more sideways than up/down. The window is large enough to make fast transitions and now that they have changed their lens into glass ones.. they rock!

@@jesseniocompetitiveshooter 😂😂yea its a bad ass gun. Thats why I went with it too. I wanted the big wide window to get into competition shooting. Its definitely the biggest in rmsc cut so it went flawless with my Apollo

@@jesseniocompetitiveshooter definitely no Alien tho 😂😂😂😂that thing is siiiiiick 🔥🔥🔥

This is my setup for cases and brass. I want to make sure they are proper for each load. That is Rollsizer for the re-sizing of the brass and ADM for decapping the brass.

Hi there! They indeed get hot if you push 20-30 rounds through it in very fast pace. I've only countered problems with reloaded ammo and there the issues have been making them too soft -> Alien likes hot ammo which produces enough gas. Also don't use any coated / painted bullets. I would go for the creator any day over a 2011 gun!

@@jesseniocompetitiveshooteroh wow, you will prefer the Alien over the 2011? That is surprising, a lot of people said 2011 are a but better. Why do you think Alien is better than 2011?

@@Gabierama For me 2011 "died" when STI stopped making them properly after Edge. After that 2011 did not really bring nothing new. It is true that high end (Atlas etc..) 2011s are really good but for me.. they bring nothing new to the table. For open guns I would go with 2011 but when it's something else.. it's Alien all the way. Folks tend to say that 2011 are "softer" to shoot but it's due the design where Aliens recoil pushes straight back like revolver or open gun would. It took me a few to get used to this but now I would never go back.

@@jesseniocompetitiveshooterI forgot to ask which 9mm you use? And which grain (115gr or 124gr?

@@Gabierama 124gr.. There are few 115gr factory ammo that I use for training but they don't make it to the PF. Same goes for some softer 124gr though too. But when it comes to reloading, it's easier to get the 124gr to make PF than 115gr. You have to make 115gr super hot even by alien standards.

Kjw/asg/clpd Shadow 2

I've not had any problems yet!

The push button is just simple light switch :)

No it does not.. both work but I have not tested them at the same time though..

Yes

Hi there! The gun is Umarex Gen 5 ( www.redwolfairsoft.com/umarex-glock-17-gen-5-gbb-pistol-by-vfc.html ). Only thing I've "updated" is installed real gun Hiviz Sights and put some grip tape. Also there are alumium magazine plates on magazines.

About 5 meters!

Thanks! I've got much more material coming as I get into it slowly :)

;)

It is a solocup where we only race against the time..

Umarex gen 5 glock 17 gas blow back 6mm

@@jesseniocompetitiveshooter ty my friend

You can get them from Shields page directly now. New RMSx comes with the cover.

In IPSC alien is legal in production optics if you have the RETRO-kit (the red dot needs to be attached to the slide and thus it needs to move).

I'm quite happy with that result!

@@jesseniocompetitiveshooter 1:33 люди-то слишком близко к мишеням, почти на линии огня.

I enjoy that gun a lot!

Well the original ”motor” was a crank and my right/left hand so I would say so :)

I have the DC motor, just wondering if it’s worth to upgrade just like yours. Thanks for responding!

What would your estimate would be hour, yours seem faster.

I’ve not timed the process but I would say 3-4k/hour easily..

Thank you!

I got mine from Double Alpha but Im sure you can get them from rollsizer resellers anywhere!

Comes with the territory :)

Give us some falling plates or texas stars！ Can't know how good you are with them paper targets😊

@@ridefastshootstraght I shoot swinger steel plates , I hate taping paper holes after every mag

Hi there! The motor I'm using is this: www.tme.eu/en/details/seh71-4c/electric-motors/besel/seh-71-4c/ . That may be "bit" overpowered for 9mm only, but when you run .223, .40 etc.. then the extra power comes in use!

@@jesseniocompetitiveshooter Hallo, Thanks for this info and quick answer! What are the diameters of the idlers you placed on the rollerizer and electric motor and what kind of rubber band did you use ?

@@pascalrademacher9361 You need this www.aliexpress.com/item/33006424241.html?spm=a2g0o.order_list.order_list_main.71.21ef1802WmiYqq with 5mm-12T-14mm-72T, 10mm and for the belt I use the one that came with.

@@jesseniocompetitiveshooter Thank you very much

@@pascalrademacher9361 No probleemos!