Видео

Hi bro maybe this video can help you, How to setup GNS3 and add FortiGate to LAB ruclips.net/video/HZ-mEdNWSRw/видео.html

រាល់ថ្ងៃបងធ្វើសំណង់ទេ ហាលភ្លៀងហាលថ្ងៃកាត់ភក់អ្នកដឹងបានដឹង😁😎

Thank you 🙏🏻

😍😎😁

Thank you bro 🙏🏻

Hi bro sorry for late reply, yes I want to but I need to upgrade my computer hardware first. It requires a lot RAM for Cisco nexus in GNS3. Thank you for your request 🙏🏻

Hi bro sorry for late reply, we have a long holiday in Cambodia 🇰🇭 it is possible technically but I never have experience on this. Normally each vendors have its own controller product to manage their AP. Base on my research you must convert Cisco to autonomous mode in order to integrate with Mikrotik CAPsMAN. If I am wrong pls correct me on this topic, thank you for your good question 🙏🏻

@@tankirivann Thank you bro for your answer. Yes, but no unfortunately. I'va got a couple or AIR-CAP's and a couple of AIR-SAP's which stand for standalone (autonomous). None of them come under cotrol of CAPsMAM unfortunately, only get IP address from the Mikrotic's DHCP Server. Regarding your research - if you convert a CAP to SAP (autonomous), then the idea of cotrolling and sharing the configurations from a CAPsMAN (or Cisco's WLC) to access points instead of configuring each AP separately will disappear at all. Right now I am learning the abilities of AIR-SAP like dot1x authentication, mac authentication, radius server usage, as Cisco AIR-SAP has all of mentioned features. But will they work thru Mikrotik, is the question.

Thanks 🥰🙏🏻

Thank you so much bro 🙏🏻 I try my best to keep up with new videos lab practices.

Your welcome sir

@@sureshkumar-nr4zc 🙏🏻

Hi bro thank you so much for your question. Base on my lab here we use access port because we require only one vlan but you can configure it as trunk port if you connect with ESXI or other virtual host with many vlan requires. It depends on your network environment and requirements.

@@tankirivann Thanks for the reply and sorry for my bad explanation. port between fortigate and core switch if interface vlan is on core switch can we do trunk allow vlan all or allow only vlan 17 or just set ip to port or make it access port (as you did in lab)

@@เมลิซานก้า hi bro thank you for your feedback, everything is possible and can do. You need to know your network requirements then apply it to your environment. I hope you can learn more with another lab here Fortigate firewall integrate with DHCP Server ruclips.net/video/PcVgBMAO3UQ/видео.html

Hi bro thank you very much for your comment, actually I tested on GNS3 also not working. So I hope we find the solution for this issue 😊🙏🏻

Hi bro thank you so much for your comment, I never do documentation sorry I don’t have it. Next lab I will prepare some documents as well for sharing in case you want to have it. 🙏🏻

@@tankirivann yes thank you so much teacher

Hi bro thanks for your question, it is very similar in terms of creating dynamic vpn networks but has some different points. Which one should we use, it is depends on our existing network and requirements.

@@tankirivann oh thanks teacher

Hi bro thank you so much for your support, pls find the link in the video description for some material for the gns3 lab

Hi bro thank you so much for your support, pls find the link in the video description for some material for the gns3 lab

Hi bro thank you so much for your support, pls find the link in the video description for some material for the gns3 lab

Hi bro thank you for your comment, I hope you can explore more about dhcp server topic with this video Fortigate firewall integrate with DHCP Server ruclips.net/video/PcVgBMAO3UQ/видео.html

Thanks 🙏🏻

Thank you 🙏🏻

Noted will make the English version bro

Hi bro thank you so much for your feedback, yes you are right this is the first time for me practicing these lab. Actually am still learning too 🙏🏻🙏🏻🙏🏻

Thank you bro🙏🏻😃

Thank you so much 😊🥰💝🙏🏻

@@tankirivann I like you

@@tankirivann I am learning from you❤️❤️❤️

@@alimohamed-lx8tq thank you for your support, I try my best to share all my experiences and knowledge

Hi bro I in my videos already for images you can find in my videos description pls check here How to setup GNS3 and add FortiGate to LAB ruclips.net/video/HZ-mEdNWSRw/видео.html

Thank you 🙏🏻

Thank you very much bro🙏🏻😊

my PC is CPU Xeon 3.3GHz, RAM 24G but you can refer to the hardware recommendation from gns3 docs.gns3.com/docs/getting-started/installation/windows/

@@tankirivann Thanks so much for the advice,

Hi bro, thank you for your comment. if you have any question or request topic pls let me know

Hi sis, thank you for your comment, actually I never test pfsense with gns3 before. I use test it with physical pc maybe 5 years ago. let me looking on this topic and get back to you ASAP.

@@tankirivann thank you 😃

@@fanasinaandriantsoa2144 😊🙏🏻

thank you for your feedback, I will improve on next videos.

Hi bro sorry for late reply, sure pls see my switch configuration here ! hostname CSW-01 ! boot-start-marker boot-end-marker ! ! logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL logging buffered 50000 logging console discriminator EXCESS ! no aaa new-model ! ! ! ! ! no ip icmp rate-limit unreachable ! ip dhcp excluded-address 192.168.10.1 192.168.10.2 ip dhcp excluded-address 192.168.10.254 ip dhcp excluded-address 192.168.20.1 192.168.20.2 ip dhcp excluded-address 192.168.30.1 192.168.30.2 ! ip dhcp pool vlan10 network 192.168.10.0 255.255.255.0 default-router 192.168.10.254 dns-server 1.1.1.1 ! ip dhcp pool vlan20 network 192.168.20.0 255.255.255.0 default-router 192.168.20.254 dns-server 1.1.1.1 ! ip dhcp pool vlan30 network 192.168.30.0 255.255.255.0 default-router 192.168.30.254 dns-server 1.1.1.1 ! ! no ip domain-lookup no ip cef no ipv6 cef ! ! ! spanning-tree mode rapid-pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! ! ! ! ! interface Port-channel1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet0/0 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet0/1 switchport trunk encapsulation dot1q switchport mode trunk channel-group 1 mode active ! interface Ethernet0/2 switchport trunk encapsulation dot1q switchport mode trunk channel-group 1 mode active ! interface Ethernet0/3 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet1/0 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet1/2 ! interface Ethernet1/3 ! interface Ethernet2/0 ! interface Ethernet2/1 ! interface Ethernet2/2 ! interface Ethernet2/3 ! interface Ethernet3/0 ! interface Ethernet3/1 ! interface Ethernet3/2 ! interface Ethernet3/3 ! interface Vlan1 no ip address shutdown ! interface Vlan10 ip address 192.168.10.1 255.255.255.0 standby 1 ip 192.168.10.254 standby 1 priority 200 standby 1 preempt ! interface Vlan20 ip address 192.168.20.1 255.255.255.0 standby 1 ip 192.168.20.254 standby 1 priority 200 standby 1 preempt ! interface Vlan30 ip address 192.168.30.1 255.255.255.0 standby 1 ip 192.168.30.254 standby 1 priority 150 standby 1 preempt ! interface Vlan110 description link to FW ip address 192.168.110.2 255.255.255.0 ! router ospf 2 network 192.168.10.0 0.0.0.255 area 0 network 192.168.20.0 0.0.0.255 area 0 network 192.168.30.0 0.0.0.255 area 0 network 192.168.110.0 0.0.0.255 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 192.168.110.1 ! ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login ! ! end ===========switch 02=========== ! hostname CSW-02 ! boot-start-marker boot-end-marker ! ! logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL logging buffered 50000 logging console discriminator EXCESS ! no aaa new-model ! ! ! ! ! no ip icmp rate-limit unreachable ! ! ! no ip domain-lookup no ip cef no ipv6 cef ! ! ! spanning-tree mode rapid-pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! ! ! ! ! interface Port-channel1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet0/0 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet0/1 switchport trunk encapsulation dot1q switchport mode trunk channel-group 1 mode active ! interface Ethernet0/2 switchport trunk encapsulation dot1q switchport mode trunk channel-group 1 mode active ! interface Ethernet0/3 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet1/0 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Ethernet1/2 ! interface Ethernet1/3 ! interface Ethernet2/0 ! interface Ethernet2/1 ! interface Ethernet2/2 ! interface Ethernet2/3 ! interface Ethernet3/0 ! interface Ethernet3/1 ! interface Ethernet3/2 ! interface Ethernet3/3 ! interface Vlan1 no ip address shutdown ! interface Vlan10 ip address 192.168.10.2 255.255.255.0 standby 1 ip 192.168.10.254 standby 1 priority 150 ! interface Vlan20 ip address 192.168.20.2 255.255.255.0 standby 1 ip 192.168.20.254 standby 1 priority 150 ! interface Vlan30 ip address 192.168.30.2 255.255.255.0 standby 1 ip 192.168.30.254 standby 1 priority 200 standby 1 preempt ! interface Vlan120 description link to FW ip address 192.168.120.2 255.255.255.0 ! router ospf 2 network 192.168.10.0 0.0.0.255 area 0 network 192.168.20.0 0.0.0.255 area 0 network 192.168.30.0 0.0.0.255 area 0 network 192.168.120.0 0.0.0.255 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 192.168.120.1 ! ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login ! ! end

@@tankirivann thank U bro

hi bro sorry for late reply, thank you for a very good question. let me put in my to do list and looking into this topic ASAP

hi bro sorry for late reply. yes there is a default template in zabbix, it should have bro

thank you bro, my PC is CPU Xeon 3.3GHz, RAM 24G but you can refer to the hardware recommendation from gns3 docs.gns3.com/docs/getting-started/installation/windows/

Thank you 🙏🏻

@@tankirivann i was wondering if you have any gns3 image for a cisco WLC and a AP, i couldn't find theme any where 😓

Hi sis thanks for your feedback, for Cisco iou images you need to apply license before you can start it. Pls follow this video How to add Cisco L3 License in gns3 ruclips.net/video/rCqNAK3i64I/видео.html

Hi bro thanks for your comment. You need to configure your vmnet adapter properly in GNS3 settings preferences

Thank you so much for your good advice and comments 🙏🏻

Hi bro sorry for late reply. Normally the requirement is GNS3 software with GNS3 VM both need to be the same version.

Hi bro thank you very much for your feedback, maybe this video can help you How to configure GNS3 access to Internet ruclips.net/video/XvhA3DNxQ_I/видео.html