Видео

Thank you for the video! Needed to know how to access the headlights in order to get a uniform tint around them and THIS video helped me figure out how to remove the front bumper!

Ty for your time making this video. It helped me a lot

Solid video, saved me some trouble. Thanks for uploading.

Yo man what’s the best way to get the window down if it’s stuck all the way up

Thank you for this video. I just got a milwaukee 3017-20 blower and put an xc 5.0. in it. After 5 minutes of use, it shut down and gave me the 1 3/2 4 error code. Just like you said, I let it cool down and the battery was fine. Now I have to buy a larger HD 12 for my blower.

I wish all tools had videos like this.

Drain from drain bolt and refille into same hole

How do you remove the cartridge when the brass stem has broken off?

The part that you said "just pulls right off" and that "it should have a key in it" is the part where the blade connects to. How do we remove that part if it's stuck tight in there? can we use a hammer? What do you recommend? Thank for your help.

Your intelligence is impressive and inspiring. Even if you only Inspire and change one person life. that's one person that will appreciate you. Your videos are appreciated

Nice 👍

Hey bro I have a Hyundai Elantra at 40K Mil , there is a serious loss of performance, fuel consumption has increased and I think the reason is the spark plugs.

Is it the same runing board for the e70 X5 and the e71 X6 ?

Just got my first gsxr 750cc yesterday and had the sam problem but now it’s gone ✅ Thanks 🙏🏻

Here’s another solution that has worked for some of these ford dual clutch 6 speed automatic transmissions. The electric motors that move the forks need a good electrical connection, including a good ground. There’s 3 grounds and all 3 are mounted to a painted surface. Follow the ground wire from the battery. Remove the first ground you get to, scrap off the paint that was under the ground connection, put a light coat of grease on the bare metal surface to prevent rust. Reinstall the ground wire and tighten it. There’s 2 more grounds under the air filter box. You will need to remove the air box to get to them. Do the same thing to them. For a video on this see Grampzquad on RUclips. He has a detailed video on how to do it, or search ford focus $5 transmission fix.

What type of speed increase would you see from this? I have a Jiangdong 5.5hp which is a Chinese clone of the gx160 and I want to do it if I get a substantial increase in speed

Hey if you can maybe do a how to video on how to make that annoying DING DING DING DING sound that the RAM1500 makes if you go over 5 MPH without your seatbelt on stop I would be so appreciative. It's driving me crazy! I'm on a large 50 acre property and need to drive around without the seatbelt to get in and out faster but I can't make the seatbelt dinging sound stop. Please teach me! Thank You!

Do u need spacers to fit 35x12.5-20 wides on leveled ram?

Well done thanks 😅

Thanks

Headlights need a upgrade

What happens if u do it too much and the screw comes out?

bro created an edit for an extremely mid truck

Thank you sir for this very educational video. Mine just did this over the weekend. I have that recall paper but had no trouble with it. They've already messed with the TCM one time at about 70,000 mi. But now it won't go into reverse and slips out of gear. So I think this might help if I can do this. Thank you again. -Robert

=^~~^= 💚 this was a great tutorial for the Delta B.O.S.S. 💥I am so motivated to give the one I have a spin for the first time (a hand-me-down tool) Thanks for this video ...!

Thanks alot it is very good

A great tutorial step by step video thanks!

😂 all you have to do is call moen for a free replacement...but if you Feel like it you can send me 45..bucks😂

Glad mine is a 12 and comes with everything

Check your ground strap also. The corrode and cause bad connections.

The best explanation on how to very nice brother I have a 03 gixxer 1000 I'm sure it's the same

Thank you for this video.My battery went dead .Do you think this would correct p060a? 2008 focus.

Thank you so much for this video

Thanks

Excellent video

Is this the reason for transmission overheating???

Literally the most helpful. I tried googling this and it only talks about the charger flashing green and red. Thank you for making this.

What converter did you use for your RCA and remote wire ? I’m having issues with mine from kicker and schose I’ve don’t this multiple times I can’t get power out to the remote

Good video, straight to the point and very helpful. Thank You!

Good video, straight forward and informative. Thank You!

What are you using for a sealant when putting it back together ?

Don't count on just hearing the pump run to tell you it's good. Listening to mine run you'd have thought it was working. It was running, moving fuel, but couldn't build enough pressure. Test the fuel pressure on the rail for a more definitive answer. I did check a bunch of other stuff unnecessarily before I decided it had to be a fuel supply issue and found myself a gauge. If I had just followed this video, and not done that, I might still be chasing my tail trying to figure out why my X5 wouldn't start. Good advice otherwise.

Was playing with this for an hour, pulled two cards out and it was in first try. 30 seconds. Life saver.

Thanks LOATD! 👍 Same thing happen to me today but was using my Milwaukee M18 16" Chainsaw... I used up my 12A battery, and I then switched to the 8A batteries. Two of them flashed just like in your video. I think it may have had something to do with the demand put on the batteries, plus I was working out in full, noon time sun. 🌞 😎

🔥🔥

when mine comes on the trans wont shift its very random. i shut it off and back on and all is good

Hey man. Really appreciate this video! You saved me a bunch of money!

A+++ on that credit card trick, saved my butt.

Sounds great 👍

Very cool 😎